Specifications - AAXA Technologies P700 User Manual

Technical Details
Troubleshooting
THE PROJECTOR DOES NOT TURN ON
Possible Causes
There is no power
The power button was not held long enough
NO PICTURE / FILE NOT SUPPORTED
Possible Causes
The video source is not properly connected or
selected
Incorrect file extension / Video is encoded with
incorrect codec
Solution
Check to ensure the power outlet or battery
source is good. Check the power adapter to
ensure a proper connection with the wall outlet
as well as the projector. Confirm that the unit is
charged and has enough power.
To power on the projector, the power button
needs to be depressed for a full 3 seconds. Try
holding the power button until the optical engine
turns on
Solution
Check the video source signal to ensure that it
is properly connected. Select the current input
source by choosing the input desired from the
main menu
Please refer to "Specifications" page to see which
file types and codex are supported. Verify that
the file was encoded properly.
39