2-3. Operating the lights and wipers
Automatic High Beam
The Automatic High Beam uses an in-vehicle camera sensor to assess the
brightness of streetlights, the lights of oncoming and preceding vehicles,
etc., and automatically turns high beam on or off as necessary.
■
Activating the Automatic High Beam system
LX570_OM_OM60L96U_(U)
Push the lever away from you with
the headlight switch in the "AUTO"
position when the "ENGINE
START STOP" switch is in IGNI-
TION ON mode.
The Automatic High Beam indi-
cator will come on when the
headlights are turned on auto-
matically to indicate that the sys-
tem is active.
2
: If equipped
213