2-1. Driving procedures
Turn signal lever
Turn signals can be operated when
■
The "ENGINE START STOP" switch is in IGNITION ON mode.
If the indicators flash faster than usual
■
Check that a light bulb in the front or rear turn signal lights has not burned out.
If the turn signals stop flashing before a lane change has been performed
■
Operate the lever again.
To discontinue flashing of the turn signals during a lane change
■
Operate the lever in the opposite direction.
Customization
■
The number of times the turn signals flash during a lane change can be changed.
(Customizable features P. 912)
LX570_OM_OM60L96U_(U)
Right turn
Left turn
Lane change to the right
(move the lever partway and
then release it)
The right hand signals will flash
3 times.
Lane change to the left
(move the lever partway and
then release it)
The left hand signals will flash 3
times.
2
189