Cruise Control Can Be Set When; Accelerating After Setting The Vehicle Speed; Automatic Cruise Control Cancelation; If The Warning Message For The Cruise Control Is Shown On The Multi-Information Display - Lexus LX 570 Owner's Manual

2-4. Using other driving systems

Cruise control can be set when

■
The shift lever is in the "D" or range "4" or higher of "S" has been selected.
●
Range "4" or higher has been selected by using the paddle shift. (vehicles with
●
paddle shift switches)
Vehicle speed is above approximately 25 mph (40 km/h).
●

Accelerating after setting the vehicle speed

■
The vehicle can be accelerated normally. After acceleration, the set speed
●
resumes.
Even without canceling the cruise control, the set speed can be increased by
●
first accelerating the vehicle to the desired speed and then pushing the lever
down to set the new speed.

Automatic cruise control cancelation

■
Cruise control will stop maintaining the vehicle speed in any of the following situa-
tions.
Actual vehicle speed falls more than approximately 10 mph (16 km/h) below
●
the preset vehicle speed.
At this time, the memorized set speed is not retained.
VSC is activated.
●
Actual vehicle speed is below approximately 25 mph (40 km/h).
●
The switching operation continues for 5 seconds or more after the center dif-
●
ferential lock switch has been operated.
If the warning message for the cruise control is shown on the multi-information
■
display
Press the "ON-OFF" button once to deactivate the system, and then press the but-
ton again to reactivate the system.
If the cruise control speed cannot be set or if the cruise control cancels immediately
after being activated, there may be a malfunction in the cruise control system. Have
the vehicle inspected by your Lexus dealer.
234
LX570_OM_OM60L96U_(U)