3-1. Using the touch screen
Changing between day mode and night mode
■
In the following conditions, the displays condition is not changed to night mode
even if the headlight switch is turned on:
• The instrument panel light control switch is turned fully to the right.
• The vehicle is in a bright area, such as outside in direct sunlight.
To turn off the display
■
The display goes off when "Screen Off" is touched. To turn the screen back on,
press any button. The selected screen appears.
NOTICE
To avoid damaging the touch screen
■
To prevent damaging the screen, lightly touch the screen buttons with your fin-
●
ger.
Do not operate or rub the screen with a ballpoint pen, a mechanical pencil, finger
●
nail, a pointy and/or hard object because this will damage the screen.
Do not use objects other than your finger to touch the screen.
●
Wipe off fingerprints using a glass cleaning cloth. Do not use chemical cleaners
●
to clean the screen, as they may damage the touch screen.
408
LX570_OM_OM60L96U_(U)
To display the screen in day mode, even with
the headlight switch on, touch "Day Mode"
for brightness and contrast control.
If the screen is set to day mode with the
headlight switch turned on, this condition is
memorized even with the engine turned
off.