Shoprider Altea SL7-3 User Manual page 15

Hide thumbs Also See for Altea SL7-3:
Table of Contents

Advertisement

Continued.....
Solar Energy
During periods of sunny weather, it is possible that surfaces of your scooter
may reach high temperatures (as with motor vehicles). Please take
precautions if leaving the scooter in direct sunlight for any period of time.
Seek shade or cover the seat and hand controls to keep any temperature
increases to a minimum.
Health Factors
Suitability for this product has been assessed on the user's current state of
health. It is essential that the user regularly monitor their ability to use the
scooter safely.
Storage and General Care
The scooter should always be stored in a dry environment such as a garage
or shed to protect the chassis and other components from corrosion from
moisture. Do not leave the scooter outside during rainstorms. If the scooter is
wet, wipe with a dry cloth to ensure there is no ingress of water into the
internal components of the scooter.
Product Stability
Scooters and powered wheelchairs are designed to allow the user flexibility of
movement in restricted areas. Driving at maximum speed and attempting
sharp turns can create a situation where the product becomes unstable.
Therefore it is essential that the user pay attention the guidance set out in this
manual.
For maximum stability the speed setting should be set up to 50% of the
maximum available (halfway between the tortoise and the hare or just
entering the red sector on the speed indicator depending on the model.
The main factors affecting stability are:
 Maximum speed setting
 Seat height
 User movement
 User's manoeuvres
 Gradients or slopes
Please keep your speed to a level where you can safely stop without having
to make any erratic turns.
Do not load bags etc. on the back of the seat as this will affect the centre of
gravity and could increase instability.
Do not lean outside of the 'footprint' of the product, especially whilst moving.
Avoid making turns on gradients or slopes.
Emergency Procedures
Should your scooter behave erratically or become unresponsive whilst driving,
release the wig-wag lever so it may return to it's neutral position and switch off
the power at the key / switch. These procedures will stop the scooter and
activate the braking system, preventing any further uncontrolled manoeuvres.
Note: Switching the power off at the key / switch can cause the scooter
to stop abruptly and should only be used to stop the scooter during an
emergency as this can damage the drive unit.
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Altea sl7-4

Table of Contents