Page 58
915U-2 Wireless I/O
Trace Route
Because the modules use the AODV protocol which is a routing protocol capable of
finding its own path through the network it can be difficult to determine the selected
communications path.
"Trace Route" allows you to trace the communications path through the network.
Example from the screen shot below:
1
192.168.2.108
(192.168.2.108)
874 ms
"1" = Hop number
"192.168.2.108" = DNS Name of the device.
"(192.168.2.108)" = IP Address of the device.
"874 ms" = A roundtrip response time (ping) in milliseconds from the Local IP to each
hop point.
Figure 36 – Trace Route
E.g. The above example shows the Ping time from the Host to the first IP address
(192.168.0.102) is 874 msec, The jump from Hop1 (192.168.0.108 to Hop2
(192.168.0.106) is 685msec, etc.
Page 58
915U-2 Wireless I/O