Table of Contents
Advertisement
Page 106
is ever changed the Server IP address will not need to be changed as it will
automatically use the localhost address.
Modbus TCP Configuration
Enable Modbus TCP
Server (Slave)
Modbus Server device
ID
Enable Modbus TCP
Client (Master)
Modbus Client Scan
Rate
Page 106
Check this box to enable the onboard Modbus TCP Server.
All Modbus TCP connections to the module IP Address and
specified Modbus Server Device ID will be routed to the
onboard I/O registers.
Specify the Modbus Device ID for the onboard Modbus TCP
Server. Allowed values are 0 to 255.
Check this box to enable the onboard Modbus TCP Client.
I/O to be transferred via the Modbus TCP client is specified
with Modbus TCP Client Mappings.
Enter the delay (in milliseconds) between executions of
consecutive Modbus TCP Client Mappings to the same
Server.
915U-2 Wireless I/O
915U-2 Wireless I/O
Advertisement
Table of Contents
