Page 102
915U-2 Wireless I/O
Digital Input
Figure 64 – Digital Input Configuration
Name – The inputs can be named to help with configuration or use the default, up to 30
characters including spaces.
Debounce Time (sec) – Debounce is the time which an input must stay stable before
the module decides that a change of state has occurred. If a digital input changes (on -
off) and changes again (off - on) in less than the debounce time, then the module will
ignore both changes. Default debounce time is .5 seconds.
Digital Output
Figure 65 – Digital Output Configuration
Name – The inputs can be named to help with configuration or use the default, up to 30
characters including spaces.
Failsafe Time (sec) – The Fail Safe Time is the time the output needs to count down
before activating the failsafe state. Receiving an update or a COS message will reset
Page 102
915U-2 Wireless I/O