Summary of Contents for Little Wonder 9600, 9810, 9900, 9100, 9130
Page 1
LITTLE WONDER ® Owners Manual and Safety Instructions HIGH OUTPUT BLOWERS MANUEL DU PROPRIÉTAIRE ET CONSIGNES DE SÉCURITÉ pour SOUFFLANTES À GRAND DÉBIT MANUAL DEL PROPIETARIO E INSTRUCCIONES DE SEGURIDAD para SOPLADORES DE ALTA POTENCIA...
A. I NTRODUCTION On behalf of everyone at Little Wonder, we would like to thank you for your purchase of a Little Wonder Gasoline Powered (Petrol-driven) High Output Blower. this professional blow- er was designed to the highest standards to ensure you many hours of uninterrupted service.
Page 3
6 HP Housing 910020 8, 9 HP Housing 910040 10, 13 HP Housing 910629 Little Wonder Housing Label - 6 HP 910612 Little Wonder Housing Label - 8 HP 910613 Little Wonder Housing Label - 9 HP 910628 Little Wonder Housing Label - 10 HP...
Page 4
405-1 5/8 SAE Flat Washer 932-1 Axle 916-2 Lower Handle 5/16 Flat Washer 910009 6/8/10 HP Right Blower Deck 910030 9 HP Right Deck 910069 13 HP Right Deck 910007 6/8/10 HP Left Blower Deck 910028 9 HP Left Deck...
- Refer to the enclosed Engine Manual provided by the engine manufacturer. - Or an authorized repair service of the manufacturer. THER OMPONENTS Contact your local Little Wonder dealer. C. S PECIAL AFETY ATTENTION; THIS SYMBOL POINTS OUT OUR MOST IMPORTANT SAFETY INSTRUCTIONS.
AFETY ECALS An important part of the safety system incorporated in this blower are the warnings and infor- mational decals (labels) found on various parts of the blower. These decals (labels) must be replaced if they become illegible due to abrasion, etc. It is your responsiblity to replace the decals (labels) when they become hard to read.
Page 7
LOWER ORQUE Location Housing to engine face Deck to housing Engine to deck Lower handle to deck Upper handle to lower handle Throttle to handle Interior deflector to hook Fan to crankshaft ( 9900) Fan to crankshaft (9100, 9130, 9600, 9810) Front panel to housing (short stud) Intake guard clamp (long stud) Wheel bracket to housing...
3. The fan has a 3/4-16 nut welded on the fan hub. Insert a 3/4-16 grade 5 bolt (or better) and jack or push the fan off the engine. (Little Wonder part #910515 pressure screw is recommended.) In some instances, it may be necessary to apply heat in area of fan hub as Loctite 242 has been used to secure the fan to the engine crank shaft.
DO NOT ATTEMPT TO REPAIR BLOWER - Have repairs made by qualified Little Wonder dealer or repairman. See that only Little Wonder and recommended engine manufacturers replacement parts are used.
STORE BLOWER INDOORS — When not in use, store blower indoors in a sheltered area (a dry place) where it’s not accessible to children. The blower, as well as fuel, should not be stored in a house. Keep throttle in the stop position.
(51). Insert 3/8-16 x 5 1/4 axle bolt (50) through wheel bracket and axle sleeve. Secure with 3/8-16 axle nut (49). WARNING - All Little Wonder blowers are shipped WITHOUT OIL. Refer to engine manufactures instruction manual for proper engine operation instructions ’...
THIS WARRANTY shall only be effective if the enclosed Warranty/Registration card is properly filled out and returned to Little Wonder, Div. of Schiller-Pfeiffer, Inc. at time of purchase. DIVISION OF SCHILLER-PFEIFFER, INCORPORATED PHONE 215-357-5110 •...
Need help?
Do you have a question about the 9600, 9810, 9900, 9100, 9130 and is the answer not in the manual?
Questions and answers