Sync Settings - HIKVISION DS-2CE1582P-VFIR3 User Manual

High-definition IR Water-proof Bullet Camera· User Manual
1. Position the cursor on one of the arrows.
2. Press the menu button to position the cursor on the character
of the current camera ID which needs to modify.
3. Move the cursor to the character list and select one to replace
it.
Clearing the camera ID
Steps:
1. Position the cursor on CLR.
2. Press the menu button to clear the characters.
Positioning the camera ID
Steps:
1. Move the cursor to POS and press the menu button to enter
the position setting interface.
2. Switch the menu button up/down/left/right to position the
camera ID.
3. Press the menu button to save the position and ex it.

4.13 SYNC Settings

You can set the synchronization mode as internal or power (line
lock) synchronization.
Steps:
1. Exit the OSD menu to the live view screen.
2. Switch and hold the menu button to the right for 2 seconds.
You can see the live view screen flickering for several seconds.
58