ADJ INNO POCKET FUSION User Instructions page 2

Inno Pocket Fusion
Unpacking:
Thank you for purchasing the Inno Pocket Fusion by
ADJ Products, LLC. Every Inno Pocket Fusion has been thoroughly
tested and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred during
shipping. If the carton appears to be damaged, carefully inspect your
fixture for any damage and be sure all equipment necessary to oper-
ate the unit has arrived intact. In the event damage has been found
or parts are missing, please contact our toll free customer support
number for further instructions. Please do not return this unit to your
dealer without contacting customer support first.
Introduction:
The Inno Pocket Fusion is a DMX intelligent Laser
& LED barrel scanner. The Inno Pocket Fusion has three operating
modes; a sound active, show mode, DMX controlled. The Inno Pocket
Fusion can operate as a stand alone fixture or in a Master/Slave con-
figuration. For best results use fog or special effects smoke to enhance
the beams projections.
Customer Support:
ADJ Products, LLC provides a toll free cus-
tomer support line, to provide help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.adj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacific Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Warning!
This may cause severe eye damage. Avoid looking directly
into the light source at all times!
ADJ Products, LLC - www.adj.com - Inno Pocket Fusion Instruction Manual Page 2
General Information
Inno Pocket Fusion
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Inno Pocket Fusion
• 5 DMX Channel Modes: 2/6/8/9/11
• 12W White LED & 4.9mW Green Laser (2-FX-1)
• 3 Operating Modes - Sound Active, Show Mode, & DMX Control
• Internal Microphone
• Digital Display for Address and Function Setting
• 8 Preprogrammed Shows
• Power Cord Daisy Chain (See page 30)
• UC IR Compatiable (Sold Separately)
Inno Pocket Fusion
The Inno Pocket Fusion carries a 2 year (730 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase
and warranty. You may also register your product online at www.
americandj.com. All returned service items whether under warranty or
not, must be freight pre-paid and accompany a return authorization
(R.A.) number. If the unit is under warranty you must provide a copy
of your proof of purchase invoice. Please contact ADJ customer sup-
port for a R.A. number.
Inno Pocket Fusion
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact ADJ Products, LLC.
During operation the housing may become extremely hot. Avoid touch-
ing the unit with bare hands while in use.
ADJ Products, LLC will not accept any liability for any resulting dam-
ages caused by the non-observance of this manual or any unauthor-
ized modification to this unit.
ADJ Products, LLC - www.adj.com - Inno Pocket Fusion Instruction Manual Page 3
General Instructions
Features
Warranty Registration
Handling Precautions