Dave Smith Instruments Sequential Prophet-6 Operation Manual page 77

Received Controller Messages
Status Second
1011 nnnn 1
1011 nnnn 4
1011 nnnn 7
1011 nnnn 74
1011 nnnn 32
1011 nnnn 64
1011 nnnn 123
1011 nnnn 121
See sections below for additional Continuous Controller (CC) and Non-
registered Parameter Number (NRPN) messages received.
Transmitted Channel Messages
Status Second
1000 nnnn 0kkkkkkk
1001 nnnn 0kkkkkkk
1011 nnnn 0vvvvvvv
1100 nnnn 0ppppppp
1101 nnnn 0vvvvvvv
1110 nnnn 0vvvvvvv
Notes: 0kkkkkkk
nnnn
0vvvvvvv
Prophet-6 Operation Manual
Third Description
0vvvvvvv Mod Wheel: directly assignable controller
0vvvvvvv Foot Controller: directly assignable controller
0vvvvvvv Volume: Combined with Master Volume and Voice
Volume
0vvvvvvv Brightness: Added to low-pass filter cutoff frequency
0vvvvvvv Bank Select: 0 - 4 select user banks 0 - 4; 5 - 9 select
factory banks 0 - 4; others ignored
0vvvvvvv Damper pedal: Holds envelopes in Sustain if 0100 0000
or higher
0vvvvvvv All Notes Off: Clear all MIDI notes
0vvvvvvv Reset All Controllers: Clears all MIDI controllers to 0,
MIDI volume to maximum
Third Description
0000000 Note Off.
0vvvvvvv Note On.
0vvvvvvv Control Change; see "Transmitted Controller Messages"
Program change, 0-99 for Programs 00-99 within
current Bank
Channel Pressure
0vvvvvvv Pitch Bend LS Byte then MS Byte
Note number 0 — 127
Channel number 0 to 15 (MIDI channel 1-16).
Ignored if MIDI channel set to ALL
Value
Appendix C: MIDI Implementation 67