Canceling Save - Dave Smith Instruments Sequential Prophet-6 Operation Manual

Canceling Save

Sometimes you may want to cancel saving a program before you
commit.
To cancel the Save process before you commit:
• If the
write
ing and saving is canceled. You can return to editing if you want.
Comparing Before You Save
Before saving a program to a new location, it's a good idea to listen to the
program in the target location to make sure you really want to overwrite it.
To evaluate a program before you overwrite it:
1. Get ready to save by pressing the
2. Press the
compare
3. Use the program buttons to navigate to the sound you want to compare
and play the keyboard to hear the sound.
4. To disable the compare function and go back to the edited sound, turn
off the
global
mode.
5. If you want to save the edited sound, the
and ready to save, so enter a location with the program buttons. The
sound is saved.
6. Alternatively, if you want to cancel saving and continue editing, press
the
write
6 Getting Started
button LED is flashing, press it again. The LED stops flash-
button. Both LEDs on the button light up, indicating
global
mode.
button. Programs can't be written while in compare
button. It stops flashing and saving is canceled.
button. It starts flashing.
write
button is still flashing
write
Dave Smith Instruments