Globals - Top Row - Dave Smith Instruments Sequential Prophet-6 Operation Manual

To set a Global parameter:
1. Press the
parameters. Pressing it a second time enables the lower set of param-
eters.
2. Press the program selector button (0 - 9) that corresponds to the desired
parameter. The parameters are printed above each switch.
3. Use the
step through available settings.
4. Once you've chosen the desired setting, press the
to exit.

Globals - Top Row

0 . Transpose: -12...12—
in semitones up to one octave up (+12) or down (-12).
1 . Master Tune: -50...50—
in cents as much as a quarter-tone up (+50) or down (-50).
2 . MIDI Channel: All, 1...16—
receive data, 1 to 16. All receives on all 16 channels.
Sets the Prophet-6's ability to send and receive MIDI
3 . MIDI Clock:
clock messages:
• Off: MIDI Clock is neither sent nor received
• Out: MIDI Clock is sent, but not received
• In: MIDI Clock is received, but not sent
• Slave Thru (i-0): MIDI Clock is received and passed to MIDI Out
• In, No Start/Stop (n55): Receives MIDI Clock but does not respond to
MIDI Start or Stop command.
When set to
the arpeggiator and sequencer will not function.
Prophet-6 Operation Manual
button. Pressing it once activates the upper set of
globals
and buttons as decrement and increment buttons to
bank tens
Master Transpose control, 0 is centered. Steps
Master Fine Tune control; 0 centered. Steps
or
in slave thru
Selects which MIDI channel to send and
, if no MIDI clock is present at the selected input,
button again
globals
Global Settings 11