Response Inverting The Pitch Of The Target Signal - Minelab GPX-4500 Instruction Manual

Response
74
Inverting the Pitch
of the Target Signal
Range
Normal, Inverted
The Response function allows you to invert the
normal pitch combination of target signals to
different size targets.
Normally, a large/deep target has a falling-then-
rising tone sequence. If you prefer a rising-then-
falling tone sequence (the same as small/shallow
target responses) for large/deep targets, use the
Response function to invert the pitch.
Normal
When Normal is selected and a small target is
detected the pitch normally rises to a higher pitch
and then falls to a lower pitch. When a deep/large
target is detected the pitch normally falls and
then rises.
Inverted
When Inverted is selected and a small target is
detected the pitch will first fall to a lower pitch and
then rise, and a deep/large target will first rise in
tone and then fall.
Response is a personal preference and is quite
dependant on your hearing.
�����������
�
������������
�������
Small Target
�����������
�
������������
�������
�����������
�����������
�
�
������������
������������
���������
�������
Deep Target
�����������
�����������
� �
������������
������������
������� ���������
�����������
�
������������
���������
75
��