Minelab GPX-4500 Instruction Manual page 10

Assembly
14
Fitting the Battery Harness:
1 Thread your arms through the harness,
so the battery pack sits on your back.
2 Clip the waist and chest buckles together.
For more detail see Adjusting the Detector
for Comfortable Detecting (pg. 16).
Attaching the Bungy Cord:
1 Create a loop in the bungy cord.
2 Undo the plastic wingnut and remove the
bolt from the clamp.
3 Push the bolt back through the clamp and
loop to secure the bungy cord to the shaft.
4 Fasten the screw with the wingnut.
5 Clip the bungy cord onto one of the harness
shoulder strap rings.
For more detail see Adjusting the Detector
for Comfortable Detecting (pg. 16).
15