Turning The Detector On - Minelab Safari Instruction Manual

To Turn on Safari:
Press and release the Power button to turn
your detector on/off. On first time start-up,
your detector will default to the Coin Mode
and you can begin detecting.
When you turn your detector on, the detector
will start with the last setting used in your
previous detecting session.

Turning the Detector on

Quick Start
– Turn on Safari by pressing the
Power button.
– On initial start-up, your detector will default
to the factory Coin Mode.
– To select a different factory preset Detect
Mode, press and release the appropriate
Mode button.
– The
icon next to the corresponding
preset Detect Mode, indicates that a
factory preset Mode has been selected. The
detector will apply the factory determined
Discrimination Pattern and audio response
for that Mode.
– Press the Noise Cancel button and wait
the 20 seconds it takes to select the most
stable channel.
– Once the Noise Cancel (p. 27) sequence is
completed you can start detecting!
Important: While performing a Noise
Cancel it is important to keep the
detector's coil motionless, and also ensure
that no metallic objects are moved in close
proximity to the detector's coil.
13