Fujitsu fi-4860C Operator's Manual page 36

Using the setup and the test modes.
This scanner has the setup mode for customizing the setup conditions, and a test mode for testing
the scanner offline.
There are two types of setup modes: The Online setup mode that can be entered during Ready
status and the Offline setup mode that can be entered only when the scanner is offline. Available
functions are different depending on the mode. For the details, refer to "7 OPERATOR PANEL
MENUS" on page 7-1.
To enter these modes, follow the instructions below:
- Online setup mode
When the LCD indicates Ready status, press
appears.
Pressing (Enter button), the scanner enters the Online setup mode.
(Next button). The following message
M o d e S
t
! S e u p
e l e c t 1
M o d e