Fujitsu fi-4860C Operator's Manual page 260

24. Selection of Imprinter
1) Press (Next button) or
<Screen24>.
2) At <Screen24>, press
select the imprinter to setup.
The blinking item is the one selected.
HINT
3) Press (Enter button) to confirm the setting.
Press (Exit button) at the end and the LCD display goes back to [Ready]
screen.
This screen is displayed only when both of fi-486PRFR and
ATTENTION
fi-486PRRE are installed.
(Previous button) and let LCD display
<Screen24>
! 2 4 I m
S e l e c t
(Left arrow button) or
p r i n t e r
P r e / P
(Right arrow button) and
o s t