Fujitsu fi-4860C Operator's Manual page 233

3) In case of (2) or (3), by pressing
<Screen5-1>.
4) At <Screen5-1>, by pressing
the document length can be specified.
By pressing (Right arrow button), selection moves from (1) to (3).
By pressing (Left arrow button), selection moves from (3) to (1).
(1) [10] is blinking: The document length difference below 10mm is not
(2) [15] is blinking: The document length difference below 15mm is not
(3) [20] is blinking: The document length difference below 20mm is not
5) Press (Enter button) to confirm the setting.
Press (Exit button), and the LCD display goes back to [Ready] screen.
(Enter button), LCD display changes to
<Screen5-1>
! 0 5 - 1
= 0
1 / 1
(Left arrow button) or
detected as an error.
detected as an error.
detected as an error.
L e n g t h
/ 2 0 m m
5
(Right arrow button),
7