Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Netti Vision
Summary of Contents for Netti Vision
- Page 1 USER MANUAL This product conforms to 93/42/EEC for medical products. My-Netti.com...
-
Page 2: Table Of Contents
CONTENTS 1. INTRODUCTION 1.1 Areas of use/indications for Netti Vision 1.2 Contraindications 1.3 Quality and durability 1.4 Environment and waste disposal 1.5 Information for re-use 1.6 About this manual 1.7 Vital measures 2. QUICK REFERENCE 3. DESCRIPTION 4. FEATURES OF NETTI Vision 5. - Page 3 9.2 Cleaning and washing instructions 10. TROUBLESHOOTING 11. TESTS & WARRANTY 11.1 Tests 11.2 Guarantee 11.3 Claim 11.4 Spare part guarantee 11.5 Special adjustment/adaptation 11.6 Combination with other products 11.7 Service and repair 12. MEASURES & WEIGHT Model: Netti Vision Language: English Version: 3/092014...
-
Page 4: Introduction
1. INTRODUCTION Netti Vision is a comfort wheelchair meant for both indoor and out-door use. In Alu Rehab we believe that wheelchairs should be chosen based on a thorough assessment fo- cusing on the needs of the user and demands from the environment. -
Page 5: Areas Of Use/Indications For Netti Vision
1.2 Contraindications • That all packaging can be Netti Vision is not suited for persons with recycled. a strongly enhanced muscular spasticity. In • That the wheelchair was designed to this case we recommend the Netti Dynamic... -
Page 6: Information For Re-Use
1.5 Information for re-use In order to avoid damages while using the All products from Alu Rehab are de- Netti Vision wheelchair, please read this signed to require low maintenance and manual carefully before starting to use the easy service. All products can be adapt- chair. -
Page 7: Vital Measures
Specification min. max. 1.7 Vital measures Overall length with foot 865 mm Netti Vision is a comfort wheelchair de- support (WB 399) signed for both outdoor and indoor use. Overall width 552 mm Folded length 658 mm Specifications varies between... -
Page 8: Quick Reference
The content of this page is a summary of the whole manual. It gives a brief introduc- Drive carefully! tion to the use and care of the Netti Vision wheelchair. Salt water can increase risk of corrosion. Further precautions related The quick reference is not a replace-... -
Page 9: Description
17. Back cushion 18. Push bow shaped tube 19. Release handle Tilt 20. Release handle Back If any of these parts are missing, please contact your dealer. * Product configuration may vary between different countries. Model: Netti Vision Language: English Version: 3/092014... -
Page 10: Features Of Netti Vision
4. Features of Netti Vision ACCESSORIES STANDARD SEAT SEAT • Pressure distributive cushions • Pressure distributive cushion • Tilt -2° to +30° • Adjustable depth of 7,5 cm HIP BELTS WHEELS • 16” puncture proof main wheels • 2 types of hip belts with fixed axle •... -
Page 11: Accessories
Pressure distribution and side support properties with visual design elements to make positioning easy. Multilayer back specially fitted to be used together with Netti Vision. Netti Flip Simple back padding. Provides room for movement. Model: Netti Vision Language: English Version: 3/092014... -
Page 12: Assembly And Adjustment
6.2 Unfolding/folding the chair The chair comes folded with wheels backrest and arm supports pre- Push red knob until mounted. cross bar clicks into position. Unlock push handles by opening red clamp, and turn rearwards into position. Model: Netti Vision Language: English Version: 3/092014... - Page 13 “Lock” position. If you hear the ion to place it cor- “click” sound on both sides the cross- rectly. bar is locked. The head rest can now be mounted. Model: Netti Vision Language: English Version: 3/092014...
- Page 14 With smooth forces you can lift the crossbar with 2 hands upwards until you have separated it. Model: Netti Vision Language: English Version: 3/092014...
-
Page 15: Main Wheel
The cushion covers are washable and thereby reuseable. Follow the instruction on the back of the cushion for correct maintenance and washing of the cushion. Model: Netti Vision Language: English Version: 3/092014... -
Page 16: Seat Depth Adjustment
6.7 Anti tip The anti tip should always be used for the safety of the user. Netti Vision is on both sides equipped with an anti tip. These have a swing away mechanism which is easy to operate. Pull 6.8 Seat cushion... -
Page 17: Foot Support
Unfix the adjustment screw so that the ad- justment bar moves freely. Adjust the foot plate to required height, then tighten the screw. The leg rest of Netti Vision is designed for easy operating and avoids potential squeeze hazard. There are 2 red knobs to operate when elevating the leg rest. - Page 18 Foot plate – angle adjustment Unfix the screw as shown by using a 5 mm Allen key. Adjust the foot plate to the re- quired angle and tighten the screw. 5 mm Allen key Model: Netti Vision Language: English Version: 3/092014...
-
Page 19: Head Support
• Pull the red release handle in hinge point. • The foot support can now be lifted up in any position. Netti Vision has a stabilizing cross bar at the upper part of the back tube carrying the head support bracket and the operating handles for tilt and recline. - Page 20 • Adjust the head support and fix it in required position. Adjusting the head support in angle: • Release the adjustment wheel at the rear of the horizontal bar (B). • Adjust the head support and fix it in required position. Model: Netti Vision Language: English Version: 3/092014...
- Page 21 Allen- key. If the head support seems too short in height, it can be turned 180° by releasing the adjustment wheel at the rear of the horizibtal bar (B) Model: Netti Vision Language: English Version: 3/092014...
-
Page 22: Arm Support
Adjusting the height of the arm support • Untighten the release handle on the arm support Never lift the chair holding onto the • Raise or lower stem arm supports. • Tighten the release handle Model: Netti Vision Language: English Version: 3/092014... -
Page 23: Brakes
• To activate: Press down. recheck the brakes. • To de-activate: Pull up. Netti Vision comes with hand operated hub brakes for attendant as an option, to allow If the wire is too loose: regulation of speed on hills and whilst ma- Adjust the foot screw all the way in. -
Page 24: Seat Angle/Tilt
There you will find a number in- dicating the actual degree (here it shows 20°). Netti Vision has a rear – and front wards tilt function (angle adjustable seat frame). To get to know which degree of angle... -
Page 25: Installation Of Hip Belt
6.15 Installation of hip belt Netti Vision is delivered prepared for installation of hip belts. Replace frame screw (1) with belt bolt, delivered with the hip-belt kit. Insert belt to the belt-bolt - in the correct belt hole (2) adjusted for the user. Fix the belt with washer and e-lock or nut delivered with the belt kit. -
Page 26: Manoeuvring The Wheelchair
• Put the front castors down on the Remember to activate anti tip after ground. curb climbing. Activate anti tip. Model: Netti Vision Language: English Version: 3/092014... -
Page 27: Driving Techniques - Slope
If two companions are present, one the floor. person can assist lifting in the front of the frame. Do not lift the wheelchair holding onto the foot supports. Do not lift the wheelchair holding onto the arm supports. Model: Netti Vision Language: English Version: 3/092014... -
Page 28: Transfer
• Pull the wheelchair backwards 5-10 cm in order to make the front castors turn for- ward. • Lock the brakes. • Tilt chair forward Never stand on the foot plates. Model: Netti Vision Language: English Version: 3/092014... -
Page 29: Lifting The Wheelchair
Make sure the user can easily reach any hand rails or handles. 8.1 Transport in car Netti Vision wheelchair is NOT intendent and approved to be used as chair in cars. Never lift the wheelchair by the foot supports or arm supports Don’t lift the wheelchair with a user... -
Page 30: Maintenance
9. Maintenance 9.1 Maintenance instructions Frequency Weekly Monthly The Netti chairs are built of modules. Alu Check defects/damages Rehab carries stock of all parts and is E.g. breakage/missing parts ready to supply these on short notice. Necessary instructions for mounting will Washing of wheelchair follow the parts. -
Page 31: Cleaning And Washing Instructions
7. Use methylated spirit to remove any dirt left. Disinfection of the wheelchair • Remove cushions (See separate washing instructions). • Use a soft rag, added with hydrogenper- oxide or technical alcohol (Isopropanol). Hydrogenperoxide recommended: NU-CIDEX “Johnson&Johnson” Model: Netti Vision Language: English Version: 3/092014... -
Page 32: Troubleshooting
P lease contact your dealer for information about authorized service facilities that can give support if solution is not reached in this form. When in need of spare parts, please contact your dealer. When making changes affecting frame construction, contact dealer / manufacturer for confirmation. Model: Netti Vision Language: English Version: 3/092014... -
Page 33: Tests & Warranty
11. TESTS & WARRANTY 11.1 Tests 11.3 Claim Netti Vision is tested for usage both in- • Claim is to be addressed to the sales doors and outdoors. agent of the wheelchair. Please note that sales documentation has to be... -
Page 34: Spare Part Guarantee
• Alu Rehab offers a 5-year guarantee (as a minimum) for spare parts. The periode Combinations of Netti and other products of guarantee is defined as beginning at not manufactured by Alu Rehab A.S the date, Alu Rehab cancels the produc- Generally in these cases, the CE mark of all tion of a specified type of chair. -
Page 35: Measures & Weight
*** Measured from from seat plate to top of back rest. The weight is including main wheels, front castors, foot supports and arm supports. No cushion. Max user weight is 100 kg. Dealer: Serial no.: Date supplied: Dealer stamp: Model: Netti Vision Language: English Version: 3/092014... - Page 36 TOGETHER WE CREATE ELEGANT SOLUTIONS AND ENABLE JOY OF LIFE x#### FEEL FREE TO CONTACT US: Alu Rehab AS Bedriftsvegen 23 4353 Klepp Stasjon NORWAY T: +47 51 78 62 20 post@My-Netti.com My-Netti.com...
Need help?
Do you have a question about the Vision and is the answer not in the manual?
Questions and answers