Related Manuals for Netti III Series
Summary of Contents for Netti III Series
- Page 1 III HD GMDN 41620 User manual This product conforms to 2017/745/EU for medical products. UM0028UK 2021-03...
-
Page 2: Table Of Contents
CONTENT INTRODUCTION AREAS OF USE/INDICATIONS FOR NETTI III AND NETTI III HD CONTRA INDICATIONS QUALITY AND DURABILITY THE ENVIRONMENT AND WASTE DISPOSAL INFORMATION FOR RE-USE ABOUT THIS MANUAL VITAL MEASURES QUICK REFERENCE DESCRIPTION* FEATURES OF NETTI III & NETTI III HD... - Page 3 12. TESTS & WARRANTY 12.1 TESTS 12.2 WARRANTY 12.3 CLAIM 12.4 NETTI CUSTOMIZED / INDIVIDUAL ADAPTATIONS 12.5 COMBINATIONS WITH OTHER PRODUCTS 12.6 SERVICE AND REPAIR 13. MEASUREMENTS & WEIGHT Model: Netti III & Netti III HD Language: English Version: 2021-03 My-Netti.com...
-
Page 4: Introduction
Netti III is available in 2 versions: - Netti III with seat widths from 350-500 mm - Netti III HD for hard use and heavier loads - with seat widths from 350 - 600 mm. Max user weight:... -
Page 5: Areas Of Use/Indications For Netti Iii And Netti Iii Hd
III has an adjustable seat and back angle, thus facilitating for the user change of position, mobilization or posture correction (stabilization), The Netti III wheelchair is tested at TÜV SÜD Product wherever the following functional impediments with Service GmbH in Germany, following the European their multiple possible causes are present: Standard DIN EN 12183:2014. -
Page 6: The Environment And Waste Disposal
-10°C to +40°C Cleaning and care. ANTI-TIP Correctly fitted, the anti-tip will secure the chair from tipping backwards. We strongly recommend the use of the anti-tips. Model: Netti III & Netti III HD My-Netti.com Language: English Version: 2021-03... -
Page 7: About This Manual
Using back rest extender gives 600 mm including back cushion. ** For Netti III with seat width 500 mm and more, the overall width exceeds recommended 700 *** Least stable and most stable refers to the positioning of the anti-tippers. - Page 8 Horizontal axle location -10 mm 95 mm Parking brake Max slope 7° Minimum turning radius, vertical leg supports R675 mm 702 mm Model with 24” main wheels. Measured without cushions. Model: Netti III & Netti III HD My-Netti.com Language: English Version: 2021-03...
-
Page 9: Quick Reference
The content of this page is a summary of the whole manual. It gives you a brief introduction to the use and care of the Netti III wheelchair. Be aware that friction against push- rims can create a warm surface. -
Page 10: Description
If any of these parts are missing, please contact your dealer. For complete information, please contact your dealer. Netti III and Netti III HD are identical chairs except for the tilt cylinder and armrest pads. Netti III has only one tilt cylinder, Netti III HD has 2 tilt cylinders. -
Page 11: Features Of Netti Iii & Netti Iii Hd
4. FEATURES OF NETTI III & NETTI III HD STANDARD OPTIONS /ACCESSORIES SEAT - NETTI UNO SEAT SEAT • Cushion with good pressure distributing properties. • Sliding seat (See chapter 5). • Tilt -9° to +16°. • Trays & reading stand for trays (See chapter 5). -
Page 12: Accessories
Adjustable in fixed info@solidworks.com LUMBAR SUPPORT positions between 33° to Increases lumbar curvature. 105° using an adjustment wheel. BRAKE EXTENDERS 90 mm 120 mm AMPUTATION SUPPORT 250 mm Model: Netti III & Netti III HD My-Netti.com Language: English Version: 2021-03... - Page 13 HEMI CUSHION A more accommodating support than the hemi arm Support E support. adjustable side supports Support F with cheek / chin support band Model: Netti III & Netti III HD Language: English Version: 2021-03 My-Netti.com...
- Page 14 SUPPORT BRACKET Meant for correction of bad postures in the upper Reduces pressure. trunk. For optimal function use together with flip backrest. PAD FOR SIDE SUPPORT CORRECTION TOOL SET Model: Netti III & Netti III HD My-Netti.com Language: English Version: 2021-03...
-
Page 15: Mounting Of Hip Belt
Wide w / axle Long /Wide w / axle EYE BOLT For fixing the wheelchair in a vehicle.To be fixed to the main wheel bracket. 2 pcs 13 mm open-end spanner. Model: Netti III & Netti III HD Language: English Version: 2021-03 My-Netti.com... -
Page 16: Mounting Of H-Belt Bar
5.2 MOUNTING OF H-BELT BAR 5.3 ELECTRICAL COMPONENTS • See separate mounting description MD0074 for Netti III EL is a wheelchair equipped with electrical Harness adapter kits. operation of tilt, recline and leg supports. The chair may be equipped with one or several electrical •... -
Page 17: Netti Dynamic System Kit
Netti Dynamic System kit is ordered and installed by Alu Rehab. NETTI DYNAMIC SYSTEM info@solidworks.com allows for Open Kinetic Chain movements (OK-C): •... - Page 18 What is Netti Dynamic Seating? • The user’s weight, width and height Netti Dynamic System is a tilt and recline wheelchair • The character and strength of the body part which allows controlled Open Kinetic Chain (OK-C) extensions and movement patterns movements of the user.
-
Page 19: Assembling And Adjusting
MOUNTING, POSITIONING AND ADJUSTMENTS OF PELVIC SUPPORTS AND SUPPORTIVE ADJUSTING HARNESSES Netti Dynamic System can be equipped with several different types of pelvic stabilizer and supportive harnesses each type developed to give the user the best stabilization support depending on the conditions: •... -
Page 20: Drive Wheels
Press it through the silicon button sitting on top. Check angle of castor bearing house (See chapter 6.5). Model: Netti III & Netti III HD My-Netti.com Language: English Version: 2021-03... -
Page 21: Seat Height At The Front
• Secure the back rest by pushing the locking bolt in from the side, through the bracket and gas strut Check and adjust the position of the anti tip head. if necessary. Model: Netti III & Netti III HD Language: English Version: 2021-03 My-Netti.com... -
Page 22: Adjusting The Seat Depth
By using the Velcro adjustment straps in the rest hinge which covers longer seat depths. See chapter 5). chair-back you can gain a few cm on the depth. Model: Netti III & Netti III HD My-Netti.com Language: English Version: 2021-03... -
Page 23: Adjusting Seat Depth At The Front
Never use the sliding seat plate in forward position as seat depth extension. Model: Netti III & Netti III HD Language: English Version: 2021-03 My-Netti.com... -
Page 24: Anti-Tip
If the anti-tip is positioned on the outside of the main wheel radius, it will interfere with curbs and stairs. The anti-tip should always be used for the safety of the user. Model: Netti III & Netti III HD My-Netti.com Language: English Version: 2021-03... -
Page 25: Cushions
• Amputation leg support. See chapter 5 for pictures. As standard Netti III is delivered with Angel adjustable leg support. Netti III HD is delivered with Angle adjustable leg support HD. The angle adjustable leg supports are swingable, height adjustable and removable. They come with height- and depth adjustable calf supports. - Page 26 • Unfix the adjustment screw so that the adjustment bar moves freely. • Slide the foot plate to required height, tighten the screw. As an accessory a star knob can replace the screw. Model: Netti III & Netti III HD My-Netti.com Language: English Version: 2021-03...
- Page 27 When adjusting leg support angle, be aware of squeeze hazard between moving parts. The angle adjustable leg support Grandis is the standard leg support for Netti III HD. info@solidworks.com Model: Netti III & Netti III HD Language: English Version: 2021-03 My-Netti.com...
- Page 28 To adjust the angle of the leg support simply release the red lever and lift or lower. The leg support will stay in the position where you lock the lever. info@solidworks.com info@solidworks.com info@solidworks.com Model: Netti III & Netti III HD My-Netti.com Language: English Version: 2021-03...
- Page 29 • To release the foot plate push the plastic knob under the right foot plate and lift the right foot plate up. dworks.com Model: Netti III & Netti III HD Language: English Version: 2021-03 My-Netti.com...
- Page 30 To adjust the height, loosen the screw on the calf support bracket and slide it into required position before fixing the screw. 5 mm Allen key. Model: Netti III & Netti III HD My-Netti.com Language: English Version: 2021-03...
-
Page 31: Head Support
(B). the four screws. Model: Netti III & Netti III HD Language: English Version: 2021-03 My-Netti.com... -
Page 32: Push Handles
• For fine adjustment, loosen the upper screw on the inside of the brakes. • Adjust the brake position and tighten the screws. 5 mm Allen key. Model: Netti III & Netti III HD My-Netti.com Language: English Version: 2021-03... - Page 33 Tighten the wire clamp, and adjust the foot screw out again. Model: Netti III & Netti III HD Language: English Version: 2021-03 My-Netti.com...
-
Page 34: Seat Angle / Tilt And Back Angle / Recline
The seat and back-rest angle must not be adjusted without using the anti-tips. The release handles has each on of the following label: Tilt Recline Model: Netti III & Netti III HD My-Netti.com Language: English Version: 2021-03... -
Page 35: Decrease The Possibility Of Sliding, Shear And Pressure Sores
MAKE SURE THAT THE USER IS SAFE WHEN THE TILT OR RECLINE FEATURES ARE GOING TO BE ADJUSTED: The tilt and recline functions of all Netti comfort wheelchair models is a «one hand operation», including the dynamic wheelchair models. This is a... -
Page 36: Operating Recline Handle: Reclining The Chair Back
The tilt handle and the tilt sign is on the push bar – shown on the previous page. Before using the Netti III as a seat in a car, be sure to remove and secure all parts ( eg trays) and... - Page 37 When the user is 1.85 m or longer and using Netti III as a seat in a car, the back rest extension must be mounted. If a Netti head support is mounted correctly...
-
Page 38: Folding For Transport
Please be aware that wider wheelchairs have Netti III wheelchairs are equipped with 2 or 3 (HD) gas springs. These are however not classified as wider turning radius and reduced dangerous goods. Contrary to general dangerous manoeuvrability in vehicles. -
Page 39: Manoeuvring
Turn the anti tip down. Model: Netti III & Netti III HD Language: English Version: 2021-03 My-Netti.com... -
Page 40: Driving Techniques - Step Down
• Put the front castors down on the ground. Turn the anti tip down. Model: Netti III & Netti III HD My-Netti.com Language: English Version: 2021-03... -
Page 41: Driving Techniques - Up Stairs
Turn the anti tip down. unnecessary stress on the back. Do not lift the wheelchair holding onto the leg, arm or head supports. Turn the anti tip down. Model: Netti III & Netti III HD Language: English Version: 2021-03 My-Netti.com... -
Page 42: Transfer
• Pull the wheelchair backwards 50–100 mm in order to make the front castors turn forward. • Lock the brakes and tilt the chair forward. Model: Netti III & Netti III HD My-Netti.com Language: English Version: 2021-03... -
Page 43: Point Of Balance
9.10 PUSH RIM easier to manoeuvre the wheelchair, but the risk of tipping backwards increases. Netti wheelchairs are delivered with aluminium push The point of balance can also be changed by rims as standard. The material and distance to the adjusting the seat depth, the seat angle and / main wheel influences the ability of the user to grip. -
Page 44: Maintenance
As a rule of thumb, use oil on movable parts Clean cushions and covers according to and all bearings. Alu Rehab recommends use instructions printed on cushions. of ordinary bicycle oil. Model: Netti III & Netti III HD My-Netti.com Language: English Version: 2021-03... -
Page 45: Long Term Storing
Before it being used again, complete the above maintenance instructions. SPARE PARTS The Netti chairs are built of modules. Alu Rehab carries stock of all parts and is ready to supply these on short notice. Necessary instructions for mounting will follow the parts. -
Page 46: Troubleshooting
When in need of spare parts, please contact your dealer. When making changes affecting frame construction, contact dealer / manufacturer for confirmation. Model: Netti III & Netti III HD My-Netti.com Language: English Version: 2021-03... -
Page 47: Tests & Warranty
12.1 TESTS Alu Rehab is not responsible for any damage resulting from inappropriate or Netti III and Netti III HD are tested and have been unprofessional installation and / or repairs, neglect, wear, from changes in wheelchair approved for usage both indoors and outdoors. -
Page 48: Netti Customized / Individual Adaptations
Individual adaptations made by Alu Netti III and Netti III HD with different configurations Rehab are labelled with a unique NeC number for of Netti equipment has been tested /risk evaluated identification. -
Page 49: Measurements & Weight
Weight include main wheels, front castors, leg supports and arm supports. The cushions are not included. Recommended tyre presure for pneumatic tyres: 60–65 PSI. Max. user weight for Netti III with seat width up to 500 mm 145 kg. When used as seat in a car: Max. user weight 136 kg. - Page 50 Dealer: Frame number.: Date: Stamp: Model: Netti III & Netti III HD My-Netti.com Language: English Version: 2021-03...
- Page 51 Model: Netti III & Netti III HD Language: English Version: 2021-03 My-Netti.com...
- Page 52 Manufacturer: Alu Rehab AS Bedriftsvegen 23 N-4353 Klepp Stasjon Norway post@My-Netti.com T: +47 51 78 62 20 my-netti.no Distributor Distributor Distributor Alu Rehab ApS Meyra GmbH MDH Sp. zo.o. Kløftehøj 8 Meyra-Ring 2 ul. W. Tymienieckiego 22/24 DK-8680 Ry D-32689 Kalletal 90-349 tódz...
Need help?
Do you have a question about the III Series and is the answer not in the manual?
Questions and answers