6.9 adjusting seat depth at the front 6.10 anti tip 6.11 adjusting arm supports 6.12 Cushions 6.13 adjusting the Velcro back 6.14 leg support 6.15 Head support 6.16 Push handles 6.17 adjusting the brake Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
Page 3
12. TESTS AND WARRANTY 12.1 tests 12.2 Guarantee 12.3 Claim 12.4 Netti Customized / individual adaptations 12.5 Combination with other products 12.6 service and repair 12. MEASUREMENTS AND WEIGHTS Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
Netti iii is available in 2 versions: - Netti iii with seat widths from 350-500 mm - Netti iii HD for hard use and heavier loads - with seat widths from 350 - 600 mm. Max user weight:...
Netti iii has an adjustable seat and back these two factors. angle, thus facilitating for the user change of position, mobilization or posture correction 1.4 THE...
1.5 INFORMATION FOR RE- 1.6 ABOUT THIS MANUAL in order to avoid damages while using the Netti iii wheelchair, please read this all products from alu rehab are manual carefully before starting to use the designed to give years of maintenance- chair.
* using back rest extender gives 600 mm support structure including back cushion. Push rim diameter 535 mm 535 mm ** For Netti iii with seat width 500 mm Horizontal axle location -10 mm 95 mm and more, the overall width exceeds Parking brake Max slope 7°...
For visually impaired people, manuals and eventually product recalls will be and catalogues can be downloaded at published on our home page www.My-Netti.com www.My-Netti.com If in doubt - contact your dealer! Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
If any of these parts are missing, please contact your dealer. For complete information, please contact your dealer. Netti III and Netti III HD are identical chairs except for the tilt cylinder and armrest pads. Netti III has only one tilt cylinder, Netti III HD has 2 tilt cylinders.
PUSH HANDLES • height adjustable, swingable, removable. BRAKES - Netti iii - user brakes BRAKES - Drum brakes Netti iii HD user brakes + drum brakes ANTI-TIP • Height and length adjustable - swingable BACK REST • Back rest extender (See chapter 5)
Lumbar support Universal increases lumbar info@solidworks.com adjustable in fixed positions curvature. between 33° to 105° using an adjustment wheel. Brake extenders 90 mm 120 mm 250 mm Amputation support Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
Can side supports be set in fixed positions. Hemi cushion a more accommodating support F with cheek/chin support than the hemi support band arm support. Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
Meant for correction of bad reduces pressure. postures in the upper trunk. For optimal function use together with flip backrest. Tool set Pad for side support Correction Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
Flexel or Pu puncture proof qualities or pneumatic. Front forks standard w/ axle 2 pcs 13 mm open-end spanner. long w/ axle short w/ axle Wide w/ axle long/Wide w/ axle Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
5.3 ELECTRICAL COMPONENTS Weight of components: Netti iii is available with electrical operation Control box: 1900 gram of tilt, recline and foot supports. Functions tilt actuator: 1650 gram...
WHAT IS NETTI DYNAMIC SEATING? synergy with the user’s movements. When accommodating the spastic extensions Netti Dynamic system is a tilt and recline pattern, muscle tone and frequency of wheelchair which allows controlled Open spasms could be reduced. the wheelchair Kinetic Chain (OK-C) movements of the is dynamic and will follow the user’s move-...
Check angle of castor When seating and wheel adjustments are bearing house. (See done in the possible positions by standard chapter 6.5). equipment, the adjustments will not exceed safe limits. Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
- unfix the wheel and replace it in the required position in the front fork. Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
This can be prevented by changing the position of the main wheel in the main wheel bracket. (See chapter 6.6). Adjust anti-tippers accordingly - chapter 6.10 Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
• Amputation leg support see chapter 5 for pictures. as standard Netti iii is delivered with angel adjustabel leg support. Netti iii HD is Foot plate height adjustment: delivered with angle adjustable leg support the foot plates are step less height adjustable.
Page 24
• To release the foot plate pull the plastic lock between the foot plates and lift the right foot plate up. When adjusting leg support angle, be aware of squeeze hazard between moving parts. Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
Page 25
MOUNTING OF ANGLE ADJUSTABLE LEG info@solidworks.com SUPPORT GRANDIS: position where you lock the lever. the angle adjustable leg support Grandis is the standard leg support for Netti iii HD. Model: Netti III and Netti III HD info@solidworks.com My-Netti.com Language: English Version: 2017-06...
Page 26
• Pull the red circular grip on top of the leg support and lift the support upwards while turning it slightly outwards. see illustration on next page. @solidworks.com Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
Never lift the wheelchair by the • Release the adjustment wheel at the rear of the horizontal bar (B). leg supports. • Adjust the head support and fix it in required position. Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
Check that the safety screw is properly tightened. 5 mm To remove the handles, the safety screw Allen key at the bottom of the handles also has to be removed. Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
Do not leave the user in the wheelchair without activating the parking brake. Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
Prototype TO BE ADJUSTED: a forward tilted seat unit brings the user the tilt and recline functions of all Netti in a position where activities - for instance comfort wheelchair models is a «one hand by a table or by standing up from the operation», including the dynamic wheel-...
8.3 TRANSPORT IN AIRPLANE the weight, size and sitting position of the user are also influencing factors. also Netti iii and Netti iii HD wheelchair may be the position of the wheels will influence transported in airplane without any restric- the driving performance.
Move the upper part of the body back- wards to maintain balance of the chair. Control the speed of the chair by clutching the push rims. Do not use the brakes. Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
• Reaching the bottom of the stair, put the castors turn forward. front castors safely down on the floor. • Lock the brakes. • Tilt chair forward. Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
(Chapt 6.2) If you want/need to change push rims or increase/decrease the distance between the push rims and the wheel, please contact your dealer Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
1. remove cushions before washing INSTRUCTIONS the wheelchair. 2. Clean cushions and covers according to the Netti chairs are built of modules. alu instructions printed on cushions. rehab carries stock of all parts and is ready to supply these on short notice.
When in need of spare parts, please contact your dealer. When making changes affecting frame construction, contact dealer / manufacturer for confirmation. Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
2-year guarantee on all other Ce labelled components except batteries. alu rehab is not responsible for any Netti iii is tested and has been approved damage resulting from inappropriate or for usage both indoors and outdoors. unprofessional installation and/or repairs, the chair is Ce marked.
PRODUCT RESPONSIBILITY 12.4 NETTI CUSTOMIZED / Netti iii and Netti iii HD with different INDIVIDUAL ADAPTATIONS configurations of Netti equipment has been tested /risk evaluated by alu rehab. Netti Customized / individual adaptations any alterations or substitutions must not are defined as all adjustments that are be made to the wheelchair securement not included in this manual.
When used as chair in a car: Max user weight 160 kg When mounting accessories such as power kit etc the weight of the accessories must be subtracted from the max user weight. Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
Page 42
Dealer: Frame number.: Date: stamp: Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
Page 43
Model: Netti III and Netti III HD My-Netti.com Language: English Version: 2017-06...
Page 44
Feel Free tO CONtaCt us: MaNuFaCturer: DistriButOr: alu rehab aps alu rehab as Kløftehøj 8 Bedriftsvegen 23 DK-8680 ry 4353 Klepp stasjon NOrWay t: +45 87 88 73 00 F: +45 87 88 73 19 t: +47 51 78 62 20 info@My-Netti.com post@My-Netti.com...
Need help?
Do you have a question about the NETTI III and is the answer not in the manual?
Questions and answers