Related Manuals for Netti DYNAMIC foot support Dual 100N
Summary of Contents for Netti DYNAMIC foot support Dual 100N
- Page 1 III HD DYNAMIC leg support Patent EP 2836184 User Manual & Mounting Description This product conforms to 2017/745/EU for medical products. UM0115 UK 2021-03...
-
Page 2: Table Of Contents
NETTI DYNAMIC DUAL – FEATURES FUNCTIONAL OVERVIEW DAILY USE MOUNT THE LEG SUPPORTS ANKLE HUGGERS FOOTPLATE LOCK ADJUSTING THE NETTI DYNAMIC LEG SUPPORT TO THE USER LEG SUPPORT HEIGHT ADJUSTMENT FOOTBOARD HEIGHT ADJUSTMENT CALF SUPPORTS ADJUSTMENT CALF SUPPORT HEIGHT ADJUSTMENT CALF SUPPORT DEPTH ADJUSTMENT... - Page 3 CHAIR WIDTHS, HEIGHTS AND FABRIC FOR NETTI DYNAMIC DUAL LEG SUPPORT TRANSPORT 10. MAINTENANCE 11. TROUBLESHOOTING 12. TESTS & WARRANTY Model: Netti DYNAMIC leg support Language: English Version: 2021-03 My-Netti.com...
-
Page 4: Introduction To Netti Dynamic Leg Supports
TO NETTI DYNAMIC LEG SUPPORTS THE CONCEPT: NETTI DYNAMIC SYSTEM WHAT IS NETTI DYNAMIC SEATING? Netti Dynamic System is a tilt and recline wheelchair which allows controlled Open Kinetic Chain (OK-C) movements of the user. Static comfort wheelchairs can be accommodated to support the user’s distal segments. -
Page 5: Netti Dynamic Dual - Features
2. NETTI DYNAMIC DUAL – FEATURES Netti Dynamic leg support DUAL is especial designed for users pushing with uneven force with their lower extremities, providing open kinetic chain. The gas cylinders works independent and allows for the leg supports to be extended differently – tilting the footboard sideways and also tilting it forwards. -
Page 6: Functional Overview
FUNCTIONAL OVERVIEW The Netti Dynamic leg supports allow controlled Open Kinetic Chain (OK-C) movements of the lower extremities of the user. Unlike static wheelchairs, the user’s distal segments are supported but can move. This helps to gain control of the proximal segments especially when the user cannot inhibit movements due to their medical condition. - Page 7 Unilateral extension of the hip (left or right part of the leg support goes down). Netti Dynamic DUAL leg support is offered in two different lengths. Netti Dynamic DUAL short leg support lengths suits...
-
Page 8: Daily Use
Ankle huggers are mounted to the footboard by threading the fixing belts through the holes in the footboard fixing them with buckles on the underside of the footboard. Model: Netti DYNAMIC leg support My-Netti.com Language: English Version: 2021-03... -
Page 9: Footplate Lock
LOCK The lock is closed by turning the outer ring info@solidworks.com 90 degrees forward! The footboard lock MUST always be closed LOCK when the chair is occupied. Model: Netti DYNAMIC leg support info@solidworks.com Language: English Version: 2021-03 My-Netti.com... -
Page 10: Adjusting The Netti Dynamic Leg Support To The User
4. ADJUSTING THE NETTI DYNAMIC LEG SUPPORT TO THE USER LEG SUPPORT HEIGHT ADJUSTMENT Measure the user’s lower leg length F – 90 degrees bent knee – measure from underside thigh to underside heel of shoe. The centre joint of the leg support is hidden under the knee-joint upholstery. -
Page 11: Calf Supports Adjustment
The calf pads can swing freely to follow the movements and adjust to the user’s leg position. info@solidworks.com info@solidworks.com info@solidworks.com Model: Netti DYNAMIC leg support Language: English Version: 2021-03 My-Netti.com... -
Page 12: Calf Support Depth Adjustment
DUAL LEG SUPPORT The red knobs allow locking the dynamic elevation of the leg support plate. For the dynamic use of the Netti Dynamic System (OK-C) this should be kept loose to allow for the knee joint to move info@solidworks.com (“OK-C movement”... -
Page 13: Footplate Angle Adjustment
/ her feet. Please note – lubrication of the gliding length profiles with white Vaseline is important to ensure smooth function of the Netti Dynamic System leg supports DUAL. info@solidworks.com Model: Netti DYNAMIC leg support Language: English Version: 2021-03... -
Page 14: Netti Dynamic Leg Supports For Different Leg Lengths
The footboard lock is removed from the length profile where it normally sits – and mounted to the extension bracket. The extension bracket is mounted to the length profile where the lock was sitting. info@solidworks.com info@solidworks.com Model: Netti DYNAMIC leg support My-Netti.com Language: English Version: 2021-03... - Page 15 The right leg support and its calf pad have to be moved forwards – suiting a user with longer right leg. All mounting illustrations are showed for Netti Dynamic info@solidworks.com PARALLEL. The mounting procedure for Netti Dynamic DUAL is similar.
- Page 16 8. CHAIR WIDTHS, HEIGHTS AND FABRIC FOR NETTI DYNAMIC DUAL LEG SUPPORT: LEG SUPPORT ADJ. R LEG SUPPORT ADJ. L CHAIR WIDTH FOOTBOARD *A CALF PAD ITEM NO. IN MM 3D FABRIC 3D FABRIC (HEIGHT 20 CM) 82856 82857 82872...
- Page 17 Please, follow the description for fixing the chair and the user as described in the User manual for the wheelchair. The Netti Dynamic leg support has to be locked when the wheelchair is used as a seat in a car.
- Page 18 11. TROUBLESHOOTING Please study the recommendations in the User Manual for the wheelchairs where the Netti Dynamic System leg support is mounted – for instance: Netti III HD (Netti Dynamic III HD) Netti 4U CED (Netti Dynamic CED) Netti BASE (Netti Dynamic BASE) etc.
- Page 19 Model: Netti DYNAMIC leg support Language: English Version: 2021-03 My-Netti.com...
- Page 20 Manufacturer: Alu Rehab AS Bedriftsvegen 23 N-4353 Klepp Stasjon Norway post@My-Netti.com T: +47 51 78 62 20 my-netti.no Distributor Distributor Distributor Alu Rehab ApS Meyra GmbH MDH Sp. zo.o. Kløftehøj 8 Meyra-Ring 2 ul. W. Tymienieckiego 22/24 DK-8680 Ry D-32689 Kalletal 90-349 tódz...
Need help?
Do you have a question about the DYNAMIC foot support Dual 100N and is the answer not in the manual?
Questions and answers