CONTENTS 1. INTRODUCTION 1.1 AREAS OF USE/INDICATIONS FOR NETTI 4U CED, CEDS AND CED XL 1.2 CONTRAINDICATIONS 1.3 QUALITY AND DURABILITY 1.4 THE ENVIRONMENT AND WASTE DISPOSAL 1.5 INFORMATION FOR RE-USE 1.6 ABOUT THIS MANUAL 1.7 VITAL MEASURES 2. QUICK REFERENCE 3.
Page 3
12. TESTS & WARRANTY 12.1 TESTS 12.2 WARRANTY 12.3 CLAIM 12.4 NETTI CUSTOMIZED / INDIVIDUAL ADAPTATIONS 12.5 COMBINATIONS WITH OTHER PRODUCTS 12.6 SERVICE AND REPAIR 13. MEASURES & WEIGHT Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2021-03 My-Netti.com...
Netti 4U CED is available in 3 versions: Max user weight: 160 kg: Netti 4U CED with standard seat depths. Netti 4U CED XL with seat widths 550 and 600 mm Max user weight: 130 kg: Netti 4U CEDS with shorter seat depth When mounting accessories such as power kit, external seating systems etc., the weight...
These disabilities may have multiple As manufacturer, Alu Rehab A.S evaluates the test to causes. Netti 4U CED, CEDS and CED XL have an be equal to 5-6 years of normal use of the chair. adjustable seat and back angle, thus facilitating for...
1.5 INFORMATION FOR RE-USE 1.6 ABOUT THIS MANUAL In order to avoid damages while using the Netti 4U All products from Alu Rehab are designed to give CED, CEDS or CED XL wheelchair, please read this years of maintenance-free service. All products can manual carefully before starting to use the chair.
Overall length with legsup- 1160 mm 1160 mm Netti 4U CED, CEDS and CED XL are comfort port wheelchairs designed for both outdoor and indoor use. Min. dimensions in the table refer to Overall length without leg 960 mm 960 mm seat width 350mm.
For visually impaired people, manuals and supports, arm supports or head support. catalogues can be downloaded at www.My-Netti.com llustrations may differ from the delivered product. If in doubt - contact your dealer! Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2021-03...
Product configuration may vary between different countries. Netti 4U CED, CEDS and CED XL are similar chairs except for different seat widths and the shorter seat depth by Netti 4U CEDS.. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2021-03 My-Netti.com...
600 mm backrest and with plastic lock or cushion. Watch out that the chair car lock. (chapter 5.1 for does not become unstable when mounting) the back is reclined Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2021-03 My-Netti.com...
Page 12
Foot board 2 tray models: upholstery Swingable and ockable Upholstery for tray Offers a soft base for the arm resting on the tray. Ankle huggers TOOL SET Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2021-03...
Insert the quick release 2pcs 13 mm open-end spanner. bolt through the centre of the main wheel and into the hub bushing while pressing the knob in centre. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2021-03 My-Netti.com...
Lead the quick release axle into the bearing house. Pull the fork slightly to ensure that the fork is fully locked. Make sure that the nut on inside of frame totally wreathes the wheel bushing. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2021-03...
• Lock the backrest by pushing the locking bolt through the plastic bracket and gas spring locking head Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2021-03 My-Netti.com...
• Use of the anti-tip • Pull the anti-tip out • Turn it up or down 180°. • Lock it in position Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2021-03...
Velcro. support at the top of the sacrum. 6.11 LEG SUPPORTS Netti 4U CED is delivered with manual Angle Adjustable leg support. Universal leg support can be ordered instead, shown to the right.
Page 18
• Adjust the leg support in required position and positions. They are delivered with height and depth fix the screw properly. adjustable calf support. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2021-03...
Page 19
Find the required position and refix it (Ill.B) 13 mm open-end spanner Never stand on the foot plates! Never lift the wheelchair by the leg supports. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2021-03 My-Netti.com...
• The head support bracket is fixed by tightening the four screws two by two diagonally so the bracket is fixed with the same strength divided on the four screws. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2021-03...
Page 21
• Move the adapter to the required position and fix the adapter by tightening the screws diagonally. • Remember to release the levers when adjusting the head support. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2021-03 My-Netti.com...
6.14 ADJUSTING THE PARKING BRAKES • The brakes are freely adjustable along the frame tube. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2021-03...
Page 23
If the wheelchair is mounted with 12” or 16” main wheels, these will be equipped with drum brakes. • Adjust the brake 22” and 24” wheels can also have drum brakes. position and tighten the screws. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2021-03 My-Netti.com...
Never lift holding on to the push bow! Never leave the user alone in the wheelchair • Always hold on to the crossbar when lifting the without activating the parking brake. wheelchair Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2021-03...
If necessary it should be improved by moving the main wheels further back. Always use anti-tippers when recline and tilt functions are being activated. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2021-03 My-Netti.com...
RECLINE FEATURES ARE GOING TO BE ADJUSTED: steeper seating angle in relation to the surface, and prevent sliding of the wheelchair user. The tilt and recline functions of all Netti comfort A forward tilted seat unit brings the user in a Prototype wheelchair models is a «one hand operation»,...
• Drive carefully down the step and angle the wheelchair forward putting the front castors back on the ground. Turn the anti-tip downwards. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2021-03 My-Netti.com...
Move the upper part of the body backwards to maintain balance of the chair. Control the speed of the chair by clutching the push rims. Do not use the brakes. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2021-03...
Never stand on the foot plates due to the • Remove leg support and arm support on the side of risk of tipping the chair forwards. the transfer. • Tilt chair to horizontal position. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2021-03 My-Netti.com...
9.1 TRANSPORT IN CAR Do not lift the wheelchair with a user in it. When Netti 4U Netti 4U CED, CEDS and CED XL are used as a seat in a car, all accessory parts that may 8.9 PUSH RIM...
Avoid any air-filled or gel • Remove the front castors (Chapt. 6.3) cushions that can collaps in an accident.. For users taller than 1.85 m, Netti 4U CED, CEDS and CED XL cannot be used as a seat in a vehicle.
9.3 TRANSPORT IN AIRPLANE EMERGENCY ESCAPE ROUTES: Netti 4U BASE wheelchair may be transported in Netti 4U CED, CEDS and CED XL with seat width 500 mm has an overall width exceeding airplane without any restrictions. Netti 4U BASE wheelchair is equipped with 2 700 mm and may have difficulties passing gas springs.
• 6. Clean cushions and covers according to instructions printed on cushions. SPARE PARTS NETTI CUSHION CLEANING PROCEDURES The Netti chairs are built of modules. Alu Rehab CORE carries stock of all parts and is ready to supply these Washing Hand wash 40ºC...
When in need of spare parts, please contact your dealer. When making changes affecting frame construction, contact dealer / manufacturer for confirmation. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2021-03...
12.1 TESTS 12.3 CLAIM Netti 4U CED, CEDS and CED XL are tested and have been approved for usage both indoors and outdoors. • If a product has developed a fault during the The chairs are CE marked.
Substitutions or alterations of components from Wheelchairs that are especially adjusted /adapted third part suppliers to Netti 4U CED, CEDS and CED by the customer cannot keep the CE mark given by XL requires the risk evaluation and acceptance Alu Rehab A.S Norway.
When mounting accessories such as power kit etc, the weight of the accessories must be subtracted from the max user weight. Max user weight is 136 kg when Netti 4U CED and CED XL are being used as a seat in a vehicle. Recommended inflation pressure using air tyres is: 60-65 PSI.
Need help?
Do you have a question about the 4U CED and is the answer not in the manual?
Questions and answers