Camera Control Unit (Rear Panel) - Sony XC-333 Operating Instructions Manual

Location and Functions of Parts and Controls

Camera Control Unit (Rear Panel)

1 GEN LOCK connector
2 Y/C connector
6 RS-232C connector
5 WE OUT connector
52
3 VIDEO OUT (output) connector
4 DC IN/VBS
connector
1 GEN LOCK (reference sync signal input) connector
(BNC-type)
Use this connector to make two or more cameras operate in
synchronization with a reference sync signal. An external
reference sync signal is input to this connector and is
synchronized with the VBS signal.
2 Y/C connector (S connector)
An image picked up by the camera is output as the Y/C
signal (luminance signal/chrominance signal). Connect to
the Y/C signal input on a monitor or VCR using a
connecting cable with a 4-pin DIN connector (not supplied).
3 VIDEO OUT (output) connector (BNC-type)
Outputs composite video signals.
4 DC IN (DC power input)/VBS (video output)
connector (12-pin)
Connect the DC-777/777CE camera adaptor (not supplied),
etc. The power is supplied from the camera adaptor to this
unit and the video signal is output from this unit.