Initializing The System And Downloading Software; Booting A 7210 Sas-M In The Lab; Configuring The 7210 Sas-M; Figure 15: 7210 Sas-M Boot Process - Alcatel-Lucent 7210 Installation Manual

Initializing the System and Downloading Software

The 7210 SAS-M ships with bootloader and TiMOS in flash. When the system is powered up for
the first time, the bootloader will attempt an auto-init procedure (see the System Basics Guide for
more information). The auto-init can, however, be interrupted and the boot operation can be
controlled manually.
By default, 7210 platforms attempt the autoinit procedure unless interrupted by user and
Note:
forced to use Timos available in the flash.

Booting a 7210 SAS-M in the Lab

There are several ways to boot the 7210 SAS-M from the network. User can choose to boot the
device using one of the following options:
•
•
The following sections describe how to boot the device using either of the options listed above.
Port: 24
IP Address: 10.135.4.172/24
Gateway: 10.135.4.1
7210 SAS-M Installation Guide
Using the image shipped along with the box to boot the device
Using the network to load the image and boot the device
SAS-M
Console Cable

Figure 15: 7210 SAS-M Boot Process

Configuring the 7210 SAS-M

FTP
Server
IP Address:
10.10.170.22/24
OSSG325
Page 51