Advertisement
SLEEP icon :
19
is displayed by pressing the SLEEP button. Press this button again to clear the display.
TEMP icon:
20
("
"function is applicable to partial of models.)
Pressing TEMP button,
Up & down swing icon:
21
is displayed when pressing the up & down swing button. Press this button again to clear the display.
LIGHT icon:
22
is displayed by pressing the LIGHT button. Press LIGHT button again to clear the display.
LOCK icon:
23
is displayed by pressing "+" and "-" buttons simultaneously. Press them again to clear the display.
SET TIME display:
24
After pressing TIMER button, ON or OFF will blink.This area will show the set time.
TURBO icon:
25
is displayed when pressing the TURBO button.Press this button again to clear the display.
DIGITAL display:
26
This area will show the set temperature.During defrosting operation,"H1" will be displayed.
AIR icon:
27
(NOTE: This function is applicable to partial of models.)
is displayed when pressing the AIR button.Press this button again to clear the display.
I FEEL icon:
28
is displayed when pressing the I FEEL button. Press this button again to clear the display.
FAN SPEED display:
29
Press FAN button to select the desired fan speed setting (AUTO-Low-Med-High).Your selection will be displayed in the LCD windows,
except the AUTO fan speed.
HEALTH icon:
30
is displayed when pressing the HEALTH button. Press this button again to clear the display.
X-FAN icon:
31
is displayed when pressing the X-FAN button. Press this button again to clear the display.
ON/OFF:
1
Press this button to turn on the unit .Press this button again to turn off the unit.
-:
2
Press this button to decrease set temperature. Hold it down for above 2 seconds to rapidly decrease set temperature. In AUTO mode, set
temperature is not adjustable.
+:
3
Press this button to increase set temperature. Hold it down for above 2 seconds to rapidly increase set temperature. In AUTO mode, set tem-
perature is not adjustable.
FAN :
4
This button is used for setting Fan Speed in the sequence that goes from AUTO,
MODE :
5
Each time you press this button, a mode is selected in a sequence that goes from AUTO,COOL,DRY, FAN,and HEAT *, as the following:
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be displayed on the LCD, and the unit will
automatically select the suitable operation mode in accordance with the room temperature to make indoor room comfortable.
(set temperature),
(ambient temperature),
AUTO
Low speed
AUTO
COOL
*Note: Only for models with heating function.
(outdoor ambient temperature) and blank is displayed circularly.
,
Medium speed
High speed
DRY
FAN
HEAT *
,
to then back to Auto.
Advertisement
