Digital Display - Gree GWH(07)RA-K3DNA1A/I Service Manual

SLEEP icon :
19
is displayed by pressing the SLEEP button. Press this button again to clear the display.
TEMP icon:
20
Pressing TEMP button,
Up & down swing icon:
21
is displayed when pressing the up & down swing button. Press this button again to clear the display.
LIGHT icon:
22
is displayed by pressing the LIGHT button. Press LIGHT button again to clear the display.
LOCK icon:
23
is displayed by pressing "+" and "-" buttons simultaneously. Press them again to clear the display.
SET TIME display:
24
After pressing TIMER button, ON or OFF will blink.This area will show the set time.
TURBO icon:
25
is displayed when pressing the TURBO button.Press this button again to clear the display.

DIGITAL display:

26
This area will show the set temperature. In SAVE mode,"SE" will be displayed. During defrosting operation, "H1" will be displayed.
AIR icon:
27
is displayed when pressing the AIR button.Press this button again to clear the display.
I FEEL icon:
28
is displayed when pressing the I FEEL button. Press this button again to clear the display.
FAN SPEED display:
29
Press FAN button to select the desired fan speed setting (AUTO Low-Med-High).Your selection will be displayed in the LCD windows,
except the AUTO fan speed.
HEALTH icon:
30
is displayed when pressing the HEALTH button. Press this button again to clear the display.
X-FAN icon:
31
is displayed when pressing the X-FAN button. Press this button again to clear the display.
1 ON/OFF:
Press this button to turn on the unit .Press this button again to turn off the unit.
-:
2
Press this button to decrease set temperature. Hold it down for above 2 seconds to rapidly decrease set temperature. In AUTO mode, set
temperature is not adjustable.
+:
3
Press this button to increase set temperature. Hold it down for above 2 seconds to rapidly increase set temperature. In AUTO mode, set tem-
perature is not adjustable.
FAN :
4
This button is used for setting Fan Speed in the sequence that goes from AUTO,
MODE :
5
Each time you press this button, a mode is selected in a sequence that goes from AUTO,COOL,DRY, FAN,and HEAT *, as the following:
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be displayed on the LCD, and the unit will automati-
cally select the suitable operation mode in accordance with the room temperature to make indoor room comfortable.
10
(set temperature), (ambient temperature),
AUTO
Low speed
AUTO COOL
*Note: Only for models with heating function.
(outdoor ambient temperature) and blank is displayed circularly.
,
Medium speed High speed
DRY FAN HEAT *
Function and Control
,
to then back to Auto.