Advertisement
I FEEL:
6
Press this button to turn on I FEEL function. The unit automatically adjust temperature according to the sensed temperature. Press this button
again to cancel I FEEL function.
7
Press this button to set HEALTH function ON or OFF. After the unit is turned on, it defaults to HEALTH function ON.
8
(NOTE: This function is applicable to partial of models.)
Press this button to select AIR function ON or OFF.
CLOCK :
9
Pressing CLOCK button,
seconds increases or decreases the time by 1 minute every 0.5 second and then by 10 minutes every 0.5 second. During blinking after
setting, press CLOCK button again to confirm the setting, and then
TIMER ON :
10
Press this button to initiate the auto-ON timer. To cancel the auto-timer program, simply press this button again.
After pressing this button,
adjust the time value. Every press of either button changes the time setting by 1 minute. Holding down either button rapidly changes the time
setting by 1 minute and then 10 minutes. Within 5 seconds after setting, press TIMER ON button to confirm.
11
Press this button to set up & down swing angle, which circularly changes as below:
This remote controller is universal. If any command ,
indicates the guide louver swings as:
X-FAN:
12
Pressing X -FAN button in COOL or DRY mode, the icon
dry the indoor unit even though you have turned off the unit. After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO,
FAN or HEAT mode.
TEMP:
13
Press this button, you can see indoor set temperature, indoor ambient temperature on indoor unit's display. The setting on remote controller
is selected circularly as below:
When selecting "
" with remote controller or no display, temperature indicator on indoor unit displays set temperature; When selecting
"
" with remote controller,temperature indicator on indoor unit displays indoor ambient temperature; 3s later or within 3s it receives other
remote control signal that will return to display the setting temperature.
Caution:
●This model hasn't outdoor ambient temperature display function. While remote controller can operate "
set temperature.
●It's defaulted to display set temperature when turning on the unit.
●Only for the models with temperature indicator on indoor unit.
TIMER OFF :
14
Press this button to initiate the auto-off timer. To cancel the auto-timer program, simply press the button again. TIMER OFF setting is the
same as TIMER ON.
TURBO:
15
Press this button to activate/deactivate the Turbo function which enables the unit to reach the preset temperature in the shortest time. In
COOL mode, the unit will blow strong cooling air at super high fan speed. In HEAT mode, the unit will blow strong heating air at super high
fan speed. (This function is not applicable for some models).
SLEEP:
16
Press this button to go into the SLEEP operation mode. Press it again to cancel this function. This function is available in COOL, HEAT
(Only for models with heating function) mode to maintain the most comfortable temperature for you.
blinks. Within 5 seconds, pressing + or - button adjusts the present time. Holding down either button above 2
disappears and " ON " blinks . 00:00 is displayed for ON time setting. Within 5 seconds, press + or - button to
AUTO
no display
will be constantly displayed.
,
or
is sent out,the unit will carry out the command as
is displayed and the indoor fan will continue operation for 2 minutes in order to
"and indoor unit displays
Advertisement
