Dolphin DOLKWP300318 User Manual

Dual frequency 300/318 mhz keypad

Table of Contents

Download this manual

DOLKWP300318

Dual Frequency 300/318 MHz Keypad

Table of Contents

Need help?

Do you have a question about the DOLKWP300318 and is the answer not in the manual?

Page 1 DOLKWP300318 Dual Frequency 300/318 MHz Keypad...
Page 2 STEP 1: Set Jumper S1 4 Sec 2 Sec Determine the operating frequency you 1 Sec 3 State/9 PORT 2 State/10 PORT will use on your keypad installation. This S2 Function Config keypad can operate at either 300 MHz or 318 MHz. At 300 MHz the keypad is S1 Frequency Selection compatible with all 300 MHz receivers with 10 dip switches.
Page 3 If the multi-color status LED flashes 3 times Red, the steps need to be repeated. STEP 7: Activating the Keypad 1. Press 2. Enter your programmed usercode. DOLKWP300318 OPERATION Return to Default Settings 1. Disconnect the power by removing the battery. 2. Press the , and keys simultaneously.
Page 4 RF Transmit Time Setting on S2 4 Sec 2 Sec 1 Sec 3 State/9 PORT 2 State/10 PORT S2 Function Config RF transmit 1 seconds S1 Frequency Selection RF transmit 2 seconds 1 2 3 4 1 2 3 4 DOWN (300 MHz) RF transmit 3 seconds UP (318 MHz)