Subscribe to Our Youtube Channel
Related Manuals for Dolphin DOLXMWIHIDEM
Summary of Contents for Dolphin DOLXMWIHIDEM
- Page 1 DOLXMWIHIDEM Reader/Keypad USER MANUAL INSTRUCTIONAL VIDEO V.8.1.18 Overview Installation Wiring Guide Functions Table...
-
Page 3: Specifications
Overview The DOLXMWIHIDEM is a Wiegand output keypad with an integrated proximity reader. The keypad is digital with built-in Light Dependent Resistor (LDR) sensor for anti-tamper. Because the keypad is IP66 rated, it can be mounted indoor or outdoor. NOTE: The anti-tamper photo eye is on the back of the unit. It must be covered to not alarm. -
Page 4: Installation
Installation • Drill 2 holes (A ,C) on the wall for the screws and one hole (B) for the cable • Knock the supplied rubber bungs to the screw holes (A ,C) • Fix the back cover firmly on the wall with 2 screws •... -
Page 5: Wiring Guide
Notes Power + +DC (9-18 VDC) Black Ground Green Data 0 White Data 1 Brown Green LED Light Control Yellow Buzzer Buzzer Control Note: Brown and Yellow wires are optional connections. +12V Black Green White Brown Yellow Access Controller DOLXMWIHIDEM... -
Page 6: Functions Table
When the input voltage for the Buzzer is low, the Buzzer will sound Wiegand Data Output Wiegand 26~37 bits range available for DOLXMWIHIDEM reader, factory default setting is Wiegand 26 bits, HID® card can output Wiegand 26~37 automatically, EM and Mifare cards are forced to output based on the reader setting. - Page 7 TRANSMITTER SOLUTIONS WARRANTY The warranty period of Transmitter Solutions keypad is twenty-four (24) months. This warranty shall begin on the date the keypad is manufac- tured. During the warranty period, the product will be,repaired or replaced (at the sole discretion of Transmitter Solutions) if the product does not operate correctly due to a defective component.
- Page 8 2480 South 3850 West, Suite B Salt Lake City, UT 84120 (866) 975-0101 • (866) 975-0404 fax www.transmittersolutions.com...
Need help?
Do you have a question about the DOLXMWIHIDEM and is the answer not in the manual?
Questions and answers