Dolphin KEYTS433RC Instructions

Dolphin Wireless Garage Door Keypad
433 MHz
Keypad Instructions
Thank you for your purchase of the Transmitter Solutions Dolphin
wireless keypad. The KEYTS433RC will accomodate one 4 digit PIN
to activate a signal transmission and can control up to four devices.
Please follow the detailed instructions below in order to set up the Dolphin keypad to
operate with your garage door opener or receiver.
2.

OPERATIONAL FEATURES

Pressing any key illuminates the keypad for 5 seconds.
A "buzzer" indicates each button depression.
After 20 incorrect key entries, the keypad will "lock up" for 40 seconds.
If the battery is low the single LED flashes rapidly for 5 seconds, indicating it is time
to replace the battery.
After you have entered a valid code, the keypad LED will flash during the 5 second
"time out" period. During the "time out" period you may press any key and the
keypad will send another signal to your receiver each time you press a key.
The key resets your entry. If you make a mistake while entering your PIN,
pressing the key resets your entry so you can start over.
HINT: If you always begin your PIN with the
faulty operation
Package contains:
Keypad
9 volt battery
2 screws + wall anchors
Keypad instructions
Product # KEYTS433RC
you will reduce the likelihood of