Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dolphin DOLKSF1KB
Summary of Contents for Dolphin DOLKSF1KB
- Page 1 DOLKSF1KB Single Gang, Flush Mount Keypad USER MANUAL V.3.6.18...
-
Page 3: Connection Terminals
Programming and installation manual INTRODUCTION The DOLKSF1KB is a secure and waterproof keypad with two relay outputs. It can work independently as a stand-alone keypad or it can work as an additional controller to create a high- security dual keypad system. It also has a 34-bit Wiegand data output from the entry of a pin/code. - Page 4 • Normally closed while the keypad is secured on its box. It is open when keypad is separated from its box. Connect this to an alarm system if necessary. • 10-12: O/P 2 OR BELL (Output Relay 2) • 10 (Normally closed) •...
-
Page 5: Led Signals
• The current Master Code will not reset ACCESS LOCK Access Lock is an optional feature of the DOLKSF1KB. An authorization code can be set-up to control access. The authorization code will lock all access to all users until unlocked. While... -
Page 6: Programming Chart
WIEGAND This Wiegand section is not necessary if your DOLKSF1KB is standalone. • The wires for Wiegand • Yellow – D1, Wiegand DATA 1 • Blue – D0, Wiegand DATA 0 • Brown – BUZ, Buzzer control line, 0V active •... - Page 7 Visitor Codes (Output 1 only) Set a Visitor Code for 40, [Visitor number: 01-50], 00, [4-8 digit The Visitor Code can only be used one-time use Visitor Code], # once until cleared. Set a Visitor Code time 40, [Visitor number: 01-50], [Hours: 01-99], [4- The Visitor Code will be cleared limit 8 digit Visitor Code], #...
- Page 8 All sounds - On 711, # All sounds will be enabled All sounds - Off 710, # All sounds will be disabled Access sound - 1 second 721, # Upon unlocking, the keypad will buzz signal granted access with a 1- second buzz Access sound - 2 short 720, #...
- Page 9 access code or egress button, the alarm will trigger. Important Note: Either "Door Forced Open" or "Open Door Alarm" can be activated. Both features should not be activated together Disable Open Door 910# Alarm Timing Egress Settings Single press, no warning 901, [Activation Delay seconds: 0-99], # Pressing the egress button will silently grant access...
-
Page 10: Specifications
The warranty period of this product is 12 months from the purchasing date. During this period, if the product does not operate correctly due to a defective component, the product will be repaired or replaced at the sole discretion of Transmitter Solutions. This warranty does not extend to the product's casing, which can be damaged by conditions outside of the control of Transmitter Solutions. - Page 11 Specifications are subject to change for modification without notice DOLKSF1KB QUICK START GUIDE As the DOLKSF1KB is powered, it will begin its booting process and beep for 1 minute. When the DOLKSF1KB is finished: 1. Enter: [Master Code], *, * (Default [Master Code]: 0000) 1.
- Page 12 TRANSMITTER SOLUTIONS WARRANTY The warranty period of Transmitter Solutions keypad is twenty-four (24) months. This warranty shall begin on the date the keypad is manufactured. During the warranty period, the product will be,repaired or replaced (at the sole discretion of Transmitter Solutions) if the product does not operate correctly due to a defective component.
Need help?
Do you have a question about the DOLKSF1KB and is the answer not in the manual?
Questions and answers