Set Up Dhcp Reservation - TRENDnet TEW-817DTR User Manual

TRENDnet User's Guide

Set up DHCP reservation

Advanced > Setup > LAN Settings
DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows
your router to assign a fixed IP address from the DHCP server IP address range to a
specific device on your network. Assigning a fixed IP address can allow you to easily
keep track of the IP addresses used on your network by your computers or devices for
future reference or configuration such as virtual server (also called port forwarding, see
"Virtual Server" on page 33) or special applications (also called port triggering, see
"Special Applications" on page 34).
1. Log into the management page (see
2. Click on Advanced and click on Setup, then click on LAN Settings.
3. Review the DHCP reservation settings.
 Enable: Enable or Disable the DHCP reservation.
 Computer Name: Enter a name of the device you will assign the DHCP reservation.
Note: You can click the Computer Name drop-down list to select from an available
computer in the DHCP server listing, click >> to copy the computer's host name/IP
address information into the fields.
 IP Address: Enter the IP address to assign to the reservation. (e.g. 192.168.10.101)
Note: You can click the Computer Name drop-down list to select from an
available computer in the DHCP server listing, click >> to copy the computer's
host name/IP address information into the fields.
 MAC Address: Enter the MAC (Media Access Control) address of the computer or
network device to assign to the reservation. (e.g. 00:11:22:AA:BB:CC)
Note: You can click Clone your PC's MAC Address to copy the current
computer's MAC address into the MAC address field.
 Copy your PC's MAC: To copy your current computer's MAC address to the field,
you can click Copy.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access your management page" on page 7).
Click Add: Saves the reservation.
Note: Click Clear discards and erases the current information.
You will see the new reservation added to the DHCP Reservations Ready Group. This is a
temporary list until you save changes by clicking Apply. You can continue to add more
DHCP reservation entries which will appear in this list. Once you have saved the settings,
the entries will appear under the DHCP Reservations list. You can click Reset to clear the
entries in the list or check the Delete option, next to the entry to remove and click
Delete.
Under the DHCP Reservations List,
You can click the icon to edit the reservation or check the Delete option next to the
entry to remove and click Delete Selected to delete the reservation. You can also click
Delete All to delete all DHCP reservation entries from the list.
To save changes when modifying a reservation, click Save.
Note: If you would like to discard the changes, click Clear.
TEW-817DTR
27