Gaming - TRENDnet TEW-817DTR User Manual

TRENDnet User's Guide
Check the option to the left most of the entry to enable and uncheck to disable.
 Rule Enable: Check the option to enable the port trigger rule.
 Rule Name: Enter a name for the port trigger rule.
 IP Address: Enter the IP address of the device to forward the port (e.g.
192.168.10.101).
 Match Protocol: Select the protocol for the firewall ports required for your
device. TCP, UDP, or Any (TCP and UDP).
 Match Port: Enter the ports or port range to be forwarded to the device. (e.g.
2000-2038,2200-2210).
 Trigger Protocol (Trigger): Select the trigger port protocol requested by the
device. TCP, UDP, or Any.
 Trigger Port: Enter the port requested by the device. (e.g. 554-554 or 6112-6112).
 Schedule (Optional): The schedule function allows you to define a schedule when
the port trigger should be turned on. To define a new schedule, click New
Schedule and refer to page 30
schedule, click the drop-down list and the new schedule will be available for
selection.
Note: Before applying scheduling, please ensure your Time settings are configured
correct and you have defined a schedule. See page 29 to configure
and see page 30 "Create Schedules" to create a schedule.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Create Schedules". After you have created a new
Time Settings
Note: In the Rule List, you can edit a rule by clicking
the rule you would like to edit. You can also delete a rule by clicking
Delete column next to the rule you would like to delete.

Gaming

Advanced > Firewall > Gaming
Gaming allows you to define multiple ports (used or required by a specific application or
game) and forward them to a single IP address (a computer or device) on your network.
Using this feature is more secure compared to using DMZ (see "DMZ" on page 33) in
which DMZ forwards all ports instead of only specific ports used by an application. Since
most ISPs constantly change your home IP address, to be able to access the Virtual
Server port(s) from the Internet it is recommended to setup Dynamic DNS service (see
"Identify your network over the Internet" section on page 29).
1. Log into the management page (see
2. Click on Advanced and click on Security, then click on Gaming.
3. Review the virtual server settings. Click Apply to save settings.
 Rule Enable: Check the option to enable the gaming rule.
 Rule Name: Enter a name for the gaming rule.
 IP Address: Enter the IP address of the device to forward the ports (e.g.
192.168.10.101).
 TCP Ports to Open: Enter the TCP port you would like to set.
 UDP Ports to Open: Enter the UDP port you would like to set.
Note: Please refer to the device documentation to determine which ports and
protocols are required. You should assign a static IP address to the device or
use DHCP reservation to ensure the IP address of the device does not change.
 Inbound Filter: Select the defined IP address range to allow access. (see
Filter" section on page 32).
 Schedule (Optional): The schedule function allows you to define a schedule when
the gaming rule should be turned on. To define a new schedule, click New
TEW-817DTR
under the Edit column next to
under the
"Access your management page" on page 7).
"Inbound
35