Reboot; Tew-817Dtr; Upgrade Firmware - TRENDnet TEW-817DTR User Manual

TRENDnet User's Guide
4. Depending on your web browser settings, you may be prompted to save a file (specify
the location) or the file may be downloaded automatically to the web browser
settings default download folder. (Default Filename: TEW-817DTR_config.bin)
To restore your router configuration:
1. Log into the management page (see
2. Click on Advanced and click on Administrator, then click on Settings Management.
3. Next to Import Settings section and Settings File Location, click Browse.
4. A separate file navigation window should open.
5. Select the router configuration file to restore and click Import. (Default Filename:
TEW-817DTR_config.bin). If prompted, click Yes or OK.
6. Wait for the router to restore settings.

Reboot

Advanced > Administrator > Settings Management
You may want to restart your router if you are encountering difficulties with your router
and have attempted all other troubleshooting.
There are two methods that can be used to restart your router.
 Turn the router off for 10 seconds using the router On/Off switch located on the
rear panel of your router or disconnecting the power port, see
Hardware Features" on page 4.
Use this method if you are encountering difficulties with accessing your router
management page. This is also known as a hard reboot or power cycle.
OR
 Router Management Page – This is also known as a soft reboot or restart.
1. Log into the management page (see
2. Click on Advanced and click on Administrator, then click on Settings Management.
3. Next to System Reboot, click Reboot.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access your management page" on page 7).
"Product
"Access your management page" on page 7).
4. Wait for the device to reboot.

Upgrade firmware

Advanced > Setup > Firmware
TRENDnet may periodically release firmware upgrades that may add features or fix
problems associated with your TRENDnet router model and version. To check if there is
a firmware upgrade available for your device, please check your TRENDnet model and
version using the link. http://www.trendnet.com/downloads/
In addition, it is also important to verify if the latest firmware version is newer than the
one your router is currently running. To identify the firmware that is currently loaded on
your router, log in to the router, click on the Administrator section and then on the
Status. The firmware used by the router is listed at the top of this page. If there is a
newer version available, also review the release notes to check if there were any new
features you may want or if any problems were fixed that you may have been
experiencing.
1. If a firmware upgrade is available, download the firmware to your computer.
2. Unzip the file to a folder on your computer.
Please note the following:
 Do not interrupt the firmware upgrade process. Do not turn off the device or
press the Reset button during the upgrade.
 If you are upgrade the firmware using a laptop computer, ensure that the laptop
is connected to a power source or ensure that the battery is fully charged.
 Disable sleep mode on your computer as this may interrupt the firmware upgrade
process.
 Do not upgrade the firmware using a wireless connection, only using a wired
network connection.
 Any interruptions during the firmware upgrade process may permanently
damage your router.
1. Log into the management page (see

TEW-817DTR

"Access your management page" on page 7).
65