Table of Contents
Advertisement
TRENDnet User's Guide
3. Review the DHCP Server settings.
• DHCP Server: Enable or Disable the DHCP server.
• Start IP: Changes the starting address for the DHCP server range.
(e.g.192.168.10.20)
• End IP: Changes the last address for the DHCP server range. (e.g. 192.168.10.30)
Note: The Start IP and End IP specify the range of IP addresses to automatically
assign to computers or devices on your network.
• DHCP Lease Time – Click the drop-down list to select the lease time.
Note: The DHCP lease time is the amount of time a computer or device can keep
an IP address assigned by the DHCP server. When the lease time expires, the
computer or device will renew the IP address lease with the DHCP server,
otherwise, if there is no attempt to renew the lease, the DHCP server will
reallocate the IP address to be assigned to another computer or device.
4. To save changes, click Apply.
Set up DHCP reservation
Network > LAN Setting
DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows
your router to assign a fixed IP address from the DHCP server IP address range to a
specific device on your network. Assigning a fixed IP address can allow you to easily
keep track of the IP addresses used on your network by your computers or devices for
future reference or configuration such as virtual server (also called port forwarding, see
"Virtual
Server" on page 33) or special applications (also called port triggering, see
"Special
Applications" on page 34).
1. Log into your router management page (see
on page 24).
2. Click on Network, and click on LAN Setting.
© Copyright 2012 TRENDnet. All Rights Reserved.
"Access your router management
page"
3. Under Add DHCP Reservation section, review the DHCP reservation settings.
• Enable: Enable or Disable the DHCP reservation feature.
• Computer Name: Enter a name for the reservation.
• IP Address: Enter the IP address to assign to the reservation. (e.g.
192.168.10.101)
Note: You cannot assign IP addresses outside of the DHCP range. The IP address
is required to be within the DHCP IP address range (Start IP & End IP).
• MAC Address: Enter the MAC (Media Access Control) address of the computer or
network device to assign to the reservation. (e.g. 00:11:22:AA:BB:CC)
• Add - Saves the reservation.
• Edit – Saves changes to an existing reservation.
• Delete – Removes an existing reservation.
DHCP Reservations List – You can view the list of reservations for computers or devices
that have been created in this list.
To modify an existing reservation, click on the entry in the Static DHCP list. When
selected, the entry will be highlighted. .
TEW-691GR
28
Advertisement
Table of Contents
