Parental Control; Access Rule (Mac/Ip Filter) - TRENDnet TEW-817DTR User Manual

TRENDnet User's Guide

Parental Control

Basic > Parental Control
Parental control settings allow you to set up restrictions/filters specifically who is
allowed or denied access to your network for a specified period of time and restricted
access to web content.

Access Rule (MAC/IP Filter)

Basic > Parental Control
Every network device has a unique, 12-digit MAC (Media Access Control) address. Every
network device must be assigned or configured with a specific IP address in order to
communicate with your network which is typically assigned by your router DHCP server
automatically. Using access rules, you can deny specific computers and other devices
from using this router's wired or wireless network by specifying the MAC address or IP
address.
1. Log into the management page (see
2. Click on Basic, click on Parental Control.
3. Check Enabled to enable the access rule.
4. Enter a Rule Name.
5. Select which Address Type to apply the filter. (MAC Address or IP Address)
Note: If you device is not listed, please refer to your computer or device documentation
to find the MAC address.
6. Manually enter the MAC Address or IP Address in the field.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access your management page" on page 7).
Note: If the network device is connected to your router, you can also click the drop-down
list to choose one of the network devices (MAC Address/IP Address) detected by your
router.
7. Schedule (Optional): The schedule function allows you to define a schedule when the
access should be active and blocking the specified MAC address or IP address. To define
a new schedule, click New Schedule and refer to page 30
have created a new schedule, click the drop-down list and the new schedule will be
available for selection.
Note: Before applying scheduling, please ensure your Time settings are configured
correct and you have defined a schedule. See page 29 to configure
page 30 "Create Schedules" to create a schedule.
8. Click Add to add the access rule to the Access Rule List. Wait of the rule to be added.
Note: Clicking Reset will discard your settings and clear all fields.
Note: In the Access Rule List, you can edit a rule by clicking
next to the rule you would like to edit. You can also delete a rule by clicking
the Delete column next to the rule you would like to delete.
TEW-817DTR
"Create Schedules". After you
Time Settings and see
under the Edit column
under
20