Cleaning; Troubleshooting - XBOX ClubSport Fanatec Manual

Clean only with a dry or slightly damp cloth. Using cleaning solutions may dam-
age your Universal Hub for Xbox One.
The Universal Hub must not be modified differently than described in this man-
ual. Endor
®
hardware, software and firmware contained in the controller. In case difficulties
occur in connection with utilization of the Universal Hub, please use the follow-
ing guide for elimination of errors. On the website www.fanatec.com/support
you will find further details and contact data.
If the Universal Hub is not working properly:
Problem description
After switching on the wheel base with attached
Universal Hub for Xbox One the auto calibration
is not working properly.
The driver window does not show the attached
steering wheel.
In driver window the button mapping seems to be
wrong as button boxes are not shown.
36
8

TROUBLESHOOTING

9
AG expressly prohibits analysis and utilization of the electronics,

CLEANING

Solution
Make sure that you have updated your wheel
base to the latest firmware version which can be
downloaded from www.fanatec.com/support.
Try to use another steering wheel like the
RFormula or RBMW. If the auto calibration is not
working properly with this rims the wheel base
might be damaged.
Make sure that you have updated your wheel
base to the latest firmware version which can be
downloaded from www.fanatec.com/ support.
Check the pins inside the Quick Release of the
Universal Hub for Xbox One, these must not be
bent or damaged.
Try to use another steering wheel like the RFor-
mula or RBMW. If this is also not detected the
wheel base might be damaged.
The buttons of the button boxes are mirrored
from the buttons on the top side of the Universal
Hub for Xbox One. For more detailled description
please see chapter 7 (Electronic connectors) of
this user manual.