Shifter Paddles - XBOX ClubSport Fanatec Manual

The large and small shifter paddles are both mounted onto the shifter paddle
boxes on the left and right side of the Universal Hub for Xbox One. Even these
shifter paddle boxes give the user the opportunity for adjustment: define the
distance between wheel rim and shifter paddles according to your individual
fondness.
Therefore the Universal Hub for Xbox One has four screw
holes on both sides as shown in the picture:
If you use the two screw holes closer to the front side of
the Universal Hub for Xbox One the distance to the wheel
rim is smaller (depending on used wheel rim):
If you use the two screw holes closer to the back side of
the Universal Hub for Xbox One the distance to the wheel
rim is bigger (depending on used wheel rim):
The distance between front side holes and backside holes is 10 mm (center
to center). The holes have gears for M5 screws. The shifter paddle boxes are
already assembled to the Universal Hub for Xbox One out-of-box.
26