Usage On Playstation4 Console - XBOX ClubSport Fanatec Manual

Then switch on the wheel base by using the 'START' button at the wheel base.
After initial calibration run the wheel base will switch to Xbox mode automati-
cally, indicated by green lit ring of light around the wheel bases' 'START' button
(see also above chapter 'Hotkeys' of this user manual).
NOTE: Depending on the power settings of your Xbox One console it is
possible to wake up the console by the Xbox guide button of the Uni-
versal Hub for Xbox One. Therefore the power settings must allow the
resume feature while console is in stand-by. If the power settings are ad-
justed to have the console switched off completely instead of stand-by
the user must switch on the console at the consoles' start button and it
is not possible to wake up the console by Universal Hub for Xbox One.
Once the wheel base is connected to the Xbox One console the white status
LED on top side of the Universal Hub for Xbox One is lit and the user can op-
erate the console with the Universal Hub for Xbox One when the wheel base is
in Xbox mode with established connection and the console operating system is
booted (navigation in Xbox dashboard and inside games).

5.3 Usage on PlayStation4 console

To use the Universal Hub for Xbox One on a PlayStation4 console you have
to attach it on your ClubSport Wheel Base V1 or V2 first, make sure the Quick
Release is properly locked on the wheel bases' shaft.
Then connect your ClubSport Wheel Base to the PlayStation4 console by USB
cable to one of the consoles' USB ports (see console manual for more detailed
information).
IMPORTANT: Please use only the USB cable that came with your
wheel base or which you have received from our customer support in
order to avoid any damages or malfunctions.
Switch on the PlayStation4 console and start the game you want to play.
IMPORTANT: The game must support the FANATEC wheel bases to
be working with them. Supporting the FANATEC wheel bases is obliging
to the game developers. We strongly recommend checking if the game
you have chosen supports the FANATEC wheel bases by FAQs on game
websites and/or with our FANATEC customer support team.
Once the game has been started switch on the wheel base by using the 'START'
button at the wheel base. After initial calibration run the wheel base will switch
13