Mounting / Adjusting Funkyswitch; Tm And Button Boxes - XBOX ClubSport Fanatec Manual

6.2 Mounting / adjusting FunkySwitch

and button boxes
TM
Open the case of the hub by loosing the four screws on the backside.
Use allen key 3mm
Mechanical:
The Universal Hub for Xbox One comes fully assembled out-of-box. The button
boxes and FunkySwitchTM are mounted between the main body front plate
and the wheel rim.
In case you only use just a single button box on one side you need to use wash-
er W1 (13.5 mm x 2.5 mm) between the wheel
rim and the hub base in order to avoid the rim
being slanted.
Please notice that the FunkySwitchTM cable is
bigger in diameter and there is only one of the
rubber cable protectors suitable for the Funky-
SwitchTM cable. It is located on the left hand
side as shown on the picture:
17