Wheel Rim - XBOX ClubSport Fanatec Manual

IMPORTANT: Please mind the correct direction of the plug and use no
force to connect the plugs!

5.3 Wheel rim

After you have installed / adjusted all the button boxes and the FunkySwitch
TM
you can install the wheel rim. Make sure you use the washers W1 (13.5 mm x
2.5 mm; included in Universal Hub box) if you are not using button boxes on all
four sides equally.
You need to use M5 screws with a max. length of 16 mm in order to avoid a col-
lision with the PCBA inside the Universal Hub for Xbox One. For third party rim
use the screws S3 (M5 x 16 mm) which are included in the Universal Hub for
Xbox One package. The FANATEC wheel rims come with the correct screws.
®
In case your wheel rim does not have holes yet you can use the drilling tem-
plate on the next page to drill the correct hole pattern.
Note: The Universal Hub for Xbox One is fully assembled to fit with the
Fanatec Wheel Rim GT out-of-box.
22