Tuning Display - XBOX ClubSport Fanatec Manual

5.6 Tuning display

The tuning display can show telemetry data (if supported by platform and
game) or is used to change the behavior settings of your wheel base (e.g. force
feedback FF, deadzone DEA or linearity LIN) or for calibration of the H-pattern
Fanatec shifters like CSS or CSS SQ.
ATTENTION: Take care for the pins and make sure they fit
properly into the sockets to avoid damage!
The tuning display can be used in horizontal or vertical position. To change po-
sition you must pull out the display from the Universal Hub for Xbox One and
put it back in the direction you want to use it. Note that it's not possible to turn
the LED display when it's inside the display slot of the Universal Hub for Xbox
One.
For further information check the FAQ section on our website
www.fanatec.com/support
28