Assembly; Plan Your Wheel - XBOX ClubSport Fanatec Manual

6.1 Plan your wheel

You can operate the Universal Hub for Xbox One without using any of the
additional buttons or paddle shifter units. Just bolt on a wheel rim and you are
ready to go.
Even on consoles you can fully operate the wheel by using the buttons on top
of the hub. For a classic wooden rim this would perhaps be the most stylish
solution.
You get more functionality and better ergonomics if you install the additional
button boxes and/or the FunkySwitch
In Xbox One mode, PlayStation 3
boxes are mapped with the same buttons you find on the top side of the hub
(rubber keys). On consoles additional buttons are not supported and on PC it
makes it easier to change wheel rims during gameplay without changing the
mapping in-game.
If you own two Universal Hub for Xbox One you might have a spare button box
you can use on the other hub so you can connect a fifth button box. This would
add additional buttons on PC but not all games support so many buttons.
After you purchase a compatible wheel rim you should make the following
decisions:
• Number and positions of the button boxes.
• How to mount the button boxes: Long or short lever, which side to connect
the lever with the button boxes (depending on wheel rim to be used)
• Position of the FunkySwitch
• Optional: Position of the smartphone to show telemetry data (smartphone
and smartphone holder are not included)
Note: The Universal Hub for Xbox One comes fully assembled to fit to the
Fanatec Wheel Rim GT out-of-box and no further adjustments on button
box or FunkySwitch positions are necessary.
16

ASSEMBLY

6
.
TM
mode and PC mode, the additional button
®
TM