Direct Access Buttons G; Eject Button 6; Additional Features; Program Button 2K - Rotel RCD-1570 Owner's Manual

10

DIRECT ACCESS Buttons G

Remote Only
These eleven numeric buttons (labeled 1 through 0 and >10) are used to
directly access a track from the IR remote control instead of stepping through
the tracks using the TRACK buttons.
The first ten tracks on a disc can be selected by pressing the corresponding
button. For example, to play the third track, press the 3 button on the remote
control. To play track 10 press the 0 button.
To select track numbers greater than 10 use the >10 button. For example,
to select track 14, press the >10 button followed by the 4 button. To select
track 23, press the >10 button twice followed by the 3 button. The number
of the selected track will appear in the main numeric area at the center of
the Display.
The DIRECT ACCESS buttons may also be used to memorize tracks in
PROGRAM mode (see PROGRAM Button section).
SEARCH Buttons 7
M
The and buttons fast forward or fast reverse through the disc that is
playing. One press of the or
at 2X normal speed. Pressing the
forward or fast reverse at 4X, then 8X, 16X and 32X normal speed. One
more press of the or button, or pressing the Play
the RCD-1570 to normal speed play. While the buttons are pressed, you
will hear high-speed audio.

EJECT Button 6

D
When a disc is inserted into the front panel Disc Slot
disc transport. To eject the disc press the EJECT button on the front panel
6 or the remote control D .
If you accidentally press either of these buttons, press the button again to
re-load the disc.

Additional Features

These convenience features add extra functionality to the RCD-1570,
including the ability to memorize a group of tracks to be played, to repeat
a disc, a program, or a track over and over, to play the tracks on a disc
in random order, to automatically play the first 10 seconds of each track,
and to select from several available time displays.

PROGRAM Button 2K

This button, labeled PROG, allows you to memorize more than 20 tracks
on the current disc for playback in a specific order. For example, you could
instruct the RCD-1570 to play track 5, followed by track 3, followed by track 8.
NOTE: Programmed play lists cannot be set up with MP3 and WMA
discs.
To begin a program:
1. Insert a disc in the front panel slot. The RCD-1570 will read the contents
of the disc. You may press the PLAY
to the tracks while you program them.
button will fast forward or fast reverse
or button repeatedly will fast
button, returns
= it is pulled into the
button if you would like to listen
RCD-1570 Stereo Compact Disc Player
2.
Press the PROGRAM 2 button on the front panel or
remote control. The PROGRAM indicator will light up in the Display,
along with "P:00" indicating that the unit is waiting for the first track to
be memorized.
3. To program tracks from the handheld remote control, enter the first track
number using the DIRECT ACCESS
memorized automatically and the Display indicator will change to "P:01",
indicating that one track has been memorized. Continue entering the rest
of your selections using the DIRECT ACCESS buttons. Note that there is
no need to press the PROGRAM button as each selection is memorized
as it is entered.
4. To program tracks from the front panel, start playing the CD and press
the PROGRAM button. Select the desired first track in the program and
press the PROGRAM button. To program additional tracks select them
rt
with the TRACK buttons then press the PROGRAM button after
each selection. To begin playing the program after selecting all desired
tracks push the PLAY button and the first track in the program will begin
playing.
Once you have memorized a play list, the RCD-1570 remains in PROGRAM
mode until you eject the disc or press the STOP button twice in succession.
If you press the PLAY button, the memorized program will play instead of
the entire disc, starting with the first selection in the memorized list.
When a PROGRAM has been memorized, most functions that would
normally affect the entire disc operate on just the memorized program. For
example, the TRACK buttons advance to the next track in the memorized
program, not the next track on the disc. Likewise, the REPEAT button (see
below) continuously plays the memorized program, not the entire disc.
NOTE: The Random Play feature cannot be used when using the
Programmed Play feature.

REVIEW Button 3J

This button is used to review the memorized tracks in Program Play mode.
Press the button and the first memorized track number and "Prog Review"
will appear in the Display. Pressing the REVIEW button again while the
track number is displayed will continue the review sequence, showing the
next memorized track. Continue pressing the REVIEW button to see the
complete memorized track list.
If the REVIEW button is not press again, after 5 seconds the review process
is terminated and the unit resumes whatever mode it was in before you
started the review process or resumes Program Play with the current track.
You may remove a selection from the Program Play list during the review
procedure using the CLEAR button, as described below.

CLEAR Button I

Remote Only
This button allows you to remove a track selection from the memorized
program play list during the review procedure described above. Follow the
review procedure until the desired track number appears. Then, instead of
pressing the REVIEW button to continue, remove the track by pressing the
CLEAR button while the track number is displayed. You may then continue
the review procedure.
button on the
K
G
buttons. Your selection will be