Table of Contents
Advertisement
10
These buttons are also used to select a track before pressing the PLAY button
or when memorizing tracks for the PROGRAM play mode (see below). These
selections are made by continuously pressing the TRACK buttons until the desired
track is reached.
In PROGRAM mode, the TRACK buttons advance or reverse to the next track in
the memorized selection list.
G
DIRECT ACCESS Buttons
(Remote Only)
These eleven numeric buttons (labeled 1 through 0 and >10) are used to directly
access a track from the IR remote control instead of stepping through the tracks
using the TRACK buttons.
The first ten tracks on a disc can be selected by pressing the corresponding
button. For example, to play the third track, press the 3 button on the
remote control. To play track 10 press the 0 button.
To select track numbers greater than 10 use the >10 button. For example,
to select track 14, press the >10 button followed by the 4 button. To
select track 23, press the >10 button twice followed by the 3 button.
The number of the selected track will appear in the main numeric area
at the center of the Display.
The DIRECT ACCESS buttons may also be used to memorize tracks in
PROGRAM mode (see PROGRAM Button section).
M
SEARCH Buttons
7
The
and
buttons fast forward or fast reverse through the disc that
is playing. One press of the
reverse at 2X normal speed. Pressing the
will fast forward or fast reverse at 4X, then 8X, 16X and 32X normal
speed. One more press of the
button, returns the RCD-1570 to normal speed play. While the buttons
are pressed, you will hear high-speed audio.
D
6
EJECT Button
When a disc is inserted into the front panel Disc Slot
the disc transport. To eject the disc press the EJECT button on the front
6
panel
or the remote control
If you accidentally press either of these buttons, press the button again
to re-load the disc.
Additional Features
These convenience features add extra functionality to the RCD-1570,
including the ability to memorize a group of tracks to be played, to repeat
a disc, a program, or a track over and over, to play the tracks on a disc
in random order, to automatically play the first 10 seconds of each track,
and to select from several available time displays.
or
button will fast forward or fast
or
button repeatedly
or
button, or pressing the Play
=
it is pulled into
D
.
RCD-1570 Stereo Compact Disc Player
K
2
PROGRAM Button
This button, labeled PROG, allows you to memorize more than 20
tracks on the current disc for playback in a specific order. For example,
you could instruct the RCD-1570 to play track 5, followed by track 3,
followed by track 8.
Note: Programmed play lists cannot be set up with MP3 and WMA discs.
To begin a program:
1. Insert a disc in the front panel slot. The RCD-1570 will read the
contents of the disc. You may press the PLAY
like to listen to the tracks while you program them.
2.
Press the PROGRAM button on the front panel or the remote control.
The PROGRAM indicator will light up in the Display, along with „P:00‰
indicating that the unit is waiting for the first track to be memorized.
3. To program tracks from the handheld remote control, enter the first
track number using the DIRECT ACCESS
be memorized automatically and the Display indicator will change
to „P:01‰, indicating that one track has been memorized. Continue
entering the rest of your selections using the DIRECT ACCESS buttons.
Note that there is no need to press the PROGRAM button as each
selection is memorized as it is entered.
4. To program tracks from the front panel, select the first track number
rt
rt
using the TRACK
buttons. To memorize additional tracks, select
them with the TRACK buttons, pressing the PROGRAM button after
each selection.
Once you have memorized a play list, the RCD-1570 remains in PROGRAM
mode until you eject the disc or press the STOP button twice in succession.
If you press the PLAY button, the memorized program will play instead
of the entire disc, starting with the first selection in the memorized list.
When a PROGRAM has been memorized, most functions that would
normally affect the entire disc operate on just the memorized program. For
example, the TRACK buttons advance to the next track in the memorized
program, not the next track on the disc. Likewise, the REPEAT button (see
below) continuously plays the memorized program, not the entire disc.
Note: The Random Play feature cannot be used when using the
Programmed Play feature.
J
REVIEW Button 3
This button is used to review the memorized tracks in Program Play mode.
Press the button and the first memorized track number and „Prog Review‰
will appear in the Display. Pressing the REVIEW button again while the
track number is displayed will continue the review sequence, showing
the next memorized track. Continue pressing the REVIEW button to see
the complete memorized track list.
If the REVIEW button is not press again, after 5 seconds the review process
is terminated and the unit resumes whatever mode it was in before you
started the review process or resumes Program Play with the current track.
button if you would
G
buttons. Your selection will
Advertisement
Chapters
Table of Contents
