Disassembly - Invacare Spectra Plus User Manual

14

Disassembly

To enable the chair to be carried in the boot of most cars, follow these instructions:
1. Disconnect the Motor/Battery connector from the control box and remove the armrests.
Release the locking lever.
2. Remove the calf strap from the footrests. This is simply attached by Velcro fastening.
Remove the footrests completely by releasing the cam latch situated on the inside of the
footrest frame hanger.
CAUTION
• Do not drive the chair with the footrests in the unlatched position.
3. Remove the kerb climber assembly (if fitted).
4. Detach the seat and backrest assembly as previously shown. When replacing the seat
assembly, ensure the brackets are located correctly on the seat frame tube.
5. Disconnect the motor leads and the connecting cables from the battery boxes. Carefully lift
the battery boxes clear of the frame by the straps provided. Remove the battery tray. When
refitting the battery tray it is important that it is correctly located on the support pins.
6. Remove the detachable motors as described later on in this User Guide.
The disassembled chair is now ready to be loaded safely in a suitable vehicle. Reversing the
procedure will allow the chair to be reassembled at your destination.
60
1446685 Spectra Plus Seat Riser UG GB 0605.PMD 60 8/17/2005, 10:38 AM